The main purpose for developing the Thermo Life is to provide energy harvesting for low-power applications where other technologies would prove inadequate or not possible.

Micro Thermoelectric Generator Targets ZigBee

Marc Poulshock | Thermo Life Energy Corp.

Micro Thermoelectric Generator
The main purpose for developing the Thermo Life is to provide energy harvesting for low-power applications where other technologies would prove inadequate or not possible.
Micro Thermoelectric Generator Targets ZigBee
Marc Poulshock, Thermo Life® Energy Corp.

The Thermo Life micro thermoelectric generator under development at Thermo Life Energy Corp. possesses the unique ability to develop small but usable power levels from temperature differences as low as 5C. While the potential applications are virtually unlimited, Thermo Life Energy has been acquired by Applied Digital (NASDAQ: ADSX) as part of a strategy to develop an energy-harvesting capability for wireless devices, particularly sensors based on the ZigBee specification, according to Marc Poulshock, President of Thermo Life Energy Corp.

Dr. Ingo Stark, CTO of Thermo Life Energy and inventor of the Thermo Life low power thermoelectric generator, explained that the device operates on the Seebeck effect used by other thermoelectric generators, such as thermopiles, to generate electricity from differences in temperature. However, the Thermo Life is implemented as 5074 thermocouple junctions connected electrically in series within a single disk-shaped package about half the diameter of a penny and roughly the same thickness. Working voltages can thus be developed at much lower temperature differences. The absolute temperature values are also lower, allowing operation between a 25C-source and a 30C-source, for example.

The Thevenin impedance of the latest Thermo Life unit is approximately 86 kΩ, and the device can drive a current of 36 μA at 3.1 V into a matching load when the difference between the applied temperatures is only 5C. This results in 111 μW of electricity for that condition.

According to Stark, because the thermoelectric voltage for the device is proportional to the temperature difference, while the output resistance remains relatively constant for lower temperatures, the available power increases with the square of the temperature difference. However, the Thermo Life is not intended to serve as a primary power component that would compete with more mature products such as batteries or solar cells, though novelty applications, such as a thermally powered wristwatch, are certainly possible.

Rather, as stated by Poulshock, the main purpose for developing the Thermo Life is to provide energy harvesting for low-power applications where other technologies would prove inadequate or not possible. Because the ZigBee specification will require low power (operating up to several years on conventional batteries) and low cost (eventual BOM of $3.00 for total solution) by design, and is poised for widespread adaptation, it will be the most attractive immediate application for Thermo Life technology.

Delivery of the new Thermo Life device to advance customers is expected later this year or early in 2007. Manufacturing agreements for general mass production are in progress. The ZigBee specification is available for download under conditions of the user agreement at www.ZigBee.org.

For more information about the Thermo Life and the physics behind it, visit Thermo Life Energy's web site (www.poweredbythermolife.com). 

 

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Kipp & Zonen - Smart SMP Pyranometers

Kipp & Zonen - Smart SMP Pyranometers

Equipped with an extremely low power, smart interface the Smart SMP pyranometers offer industry standard digital and amplified analog outputs within the well-known CMP series housings. The output range is programmed so that all SMP pyranometers have identical sensitivities, allowing easy installation and exchange for recalibration. Serial communication allows access to measurement data, instrument status, operating parameters and calibration history. Building on the proven CMP Series design and technology that is used around the world, the new SMP pyranometers add digital signal processing and interfaces optimised for industrial data acquisition and control systems.