The Saft Intensium® Max containerized energy storage system, with a nominal output of 2 MW and 1 MWh of capacity, has been installed at Fortum’s Järvenpää biomass fired CHP (combined heat andpower) plant.

Saft Li-ion energy storage will maintain the balance of power for Finland’s transition to a solar economy

Contributed by | Saft

Fortum, the Finnish energy company, is carrying out the BATCAVE project to explore how energy storage can help balance supply and demand as the country makes the transition from traditional energy production to a solar economy that utilizes renewable resources. The project features the largest ever electricity storage installation in the Nordic countries and is based on the highest power and energy Li-ion system that Saft has ever delivered in a single 20-foot Intensium® Max container.

Fortum’s vision is to be the forerunner in clean energy. It has a number of key objectives for the BATCAVE R&D project. Primarily, it wants to investigate and evaluate how the effective storage of electricity can help it stay on top of changes in electricity markets as they evolve to accommodate more decentralized and intermittent resources. It is also exploring how to best utilize the battery as part of its energy business, starting with offering frequency controlled power reserves (FCR-N) to Fingrid, Finland’s transmission system operator. Finally, the BATCAVE project will act as an extension of Fortum’s pioneering experiments in which it is building a virtual power plant (VPP) based on demand flexibility.

The BATCAVE energy storage offers Fortum’s a number opportunities to achieve long term benefits:

• Reduced costs in hydropower maintenance

• Additional flexible capacity to generate more income

• Combining existing and new income streams with battery technology:

- Primary reserve operations
- Power shifting in other intra-day and day-ahead markets
- Reactive power control
- Power plant support

 

Energy storage co-located at CHP plant

The Saft Intensium® Max containerized energy storage system, with a nominal output of 2 MW and 1 MWh of capacity, has been installed at Fortum’s Järvenpää biomass fired CHP (combined heat andpower) plant.

 

Safety and control systems

The Intensium® Max container houses over 6,600 Li-ion cells arranged in 17 individual units. Each unit has an independent monitoring and safety system – the BMM (Battery Management Module). The BMM monitors the temperature, voltage and current of each cell and interfaces with the MBMM (Master Battery Management Module) to provide real-time informationon key operational criteria such as the battery temperature, state of charge (SOC) and state of health (SOH). This focus on monitoring enables Saft to guarantee safe behavior at every level from cell to container.

The entire battery and power conversion system can be controlled remotely from Fortum’s central control room. Local control is also possible by Fortum’s battery controller system.

Fortum Intensium ® Max - key features

• 1 x Intensium® Max container

• 6,664 lithium-ion (Li-ion) cells

• 1 MWh storage capacity

• 2 MW peak power in both directions

• Capable of charging from zero to fully-charged in 30 minutes

• HVAC system maintains optimum operating temperature even when outside temperature falls to -20°C

• Schneider ESS Box 2040 kVA power conversion system with 3 XC680ES inverters

 

Tatu Kulla, Fortum Head of Operations, says:
“Increasing the amount of energy produced with solar and wind power will increase the need for regulating power that balances the electricity network and for new storage solutions. When the weather is sunny or windy, there is plenty of energy production, but less demand, so it makes sense to store the electricity. In this project, we are also researching new business models that can be developed with storage for electricity companies and customers.”

 

 


Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Parker Wind Power Solutions - Core technologies to help you harness the wind… onshore and offshore

Parker Wind Power Solutions - Core technologies to help you harness the wind… onshore and offshore

Visit Booth #2886 at AWEA Windpower, May 22-25 in Anaheim, CA to see how Parker products, systems and services help you raise performance while reducing risk in wind energy environments. Parker has been on the forefront of windpower for over two decades, with solutions that touch virtually every critical function in the turbine. From integrated lube oil filtration systems and sealing technologies that make drive trains more reliable and bearings operate like new to compact blade pitch actuation systems that maximize rotor efficiency and minimize vibrations in the turbine. Parker has the solutions that make today's advanced and sophisticated wind power plants better and smarter. Case in point? Our high efficiency power conversion systems that deliver optimum power to the grid. While our scalable evaporative cooling system lowers overall system cost with up to 40% higher power throughput.