DOE study Confirms Vast Untapped Energy and Jobs Potential for Distributed Wind Energy Systems

Today the National Renewable Energy Lab (NREL), under the direction and funding of the U.S. Department of Energy (DOE), released a first ever technical and economic analysis of distributed wind powers potential in the U.S. Distributed wind typically means smaller wind turbines installed at homes, farms, businesses, and public facilities where they serve to reduce consumers electric bills. The key finding in the new study is that distributed wind could be installed at millions of locations nationwide and has the technical potential to power the entire U.S. electrical system.

Durango, CO - Today the National Renewable Energy Lab (NREL), under the direction and funding of the U.S. Department of Energy (DOE), released a first ever technical and economic analysis of distributed wind powers potential in the U.S. Distributed wind typically means smaller wind turbines installed at homes, farms, businesses, and public facilities where they serve to reduce consumers electric bills. The key finding in the new study is that distributed wind could be installed at millions of locations nationwide and has the technical potential to power the entire U.S. electrical system.


"Solar has received tremendous federal and state support over the last three decades. This new DOE report shows that a more modest set of similar programs aimed at distributed wind could yield huge benefits. Particularly since this is ‘made-in-America equipment" said Jennifer Jenkins, Executive Director of the Distributed Wind Energy Association (DWEA).

Several takeaways include:
• Distributed wind powers total addressable resource potential is comparable to wind farms and offshore wind, potentially supporting millions of systems and thousands of gigawatts of power production capacity;
• In aggregate terms, the resource potential for this sector "exceeds total U.S. electricity demand," which comprised approximately 3,700 TWh of electricity in 2015;
• "Behind the meter" distributed wind turbines are technically feasible for a large portion of the U.S. building stock, including "about 49.5 million buildings";
• Major increases in electricity production (and corresponding rural economic development) from this sector are quite possible, especially with policies that have been successful with solar;
• Community or "locally owned" wind power is not assessed in this modeling, but if it were, it is believed to have "significant additional potential" not captured within the scope of the current analysis

"This report is timely because the Congress has the opportunity over the next few weeks to fix an omission in last years spending bill that provided a five-year extension of solar tax credits but did not do the same for small wind. Hopefully we wont be giving tax credits for imported solar modules that arent available to small wind systems built in America. This new report shows that wed be throwing away lots of U.S. manufacturing jobs" stated Mike Bergey, President of DWEA.

For a copy of the report please click on this link:
http://energy.gov/eere/articles/new-report-shows-potential-growth-distributed-wind-energy-site-power
About the Distributed Wind Energy Association: The Distributed Wind Energy Association is a collaborative group comprised of manufacturers, distributors, project developers, dealers, installers, and advocates, whose primary mission is to promote and foster all aspects of the American distributed wind energy industry. Distributed wind, commonly referred to as small and community wind, is the use of typically smaller wind turbines at homes, farms, businesses, and public facilities to off-set all or a portion of on-site energy consumption. DWEA seeks to represent members and associates from all sectors with relevant interests pertaining to the distributed wind industry. For more information on DWEA, please go to www.distributedwind.org. Follow us on Twitter @DWEA and like us on Facebook.

Featured Product

QuickBOLT - Expand Your Services

QuickBOLT - Expand Your Services

Explore new lines of income for your solar installation business with QuickBOLT's Stone Coated Steel roof mounts designed in partnership with metal roof manufacturers themselves. These SCS roof mounts work on all metal tile profiles and will help you bring in money you're missing out on. By not driving into the roofing material, QuickBOLT's Stone Coated Steel roof hooks maintain the integrity of the roof. Install with ease and confidence knowing your roof is protected against the harsh elements that these hooks are designed for.