Introducing the ALLMEGA "Ozone friendly" Heat Pump Water Heater

Designed to Save Energy the Allmega HPHW Unit combines Air Conditioning & HW Heater/Storage, by extracting "Free" heat from surrounding air within the conditioned area,by collecting air this way the Allmega heat pump can transfer Heat Energy almost twice as fast as the Electrical Energy it consumes to operate, and show up to 45% annual cost savings.

Designed to Save Energy the Allmega HPHW Unit combines Air Conditioning & HW Heater/Storage, by extracting "Free" heat from surrounding air within the conditioned area,by collecting air this way the Allmega heat pump can transfer Heat Energy almost twice as fast as the Electrical Energy it consumes to operate, and show up to 45% annual cost savings.


Allmega Units make full use of hot refrigerant to heat the stored water [immersion heater] in the incorporated vessel which can be fed via Storage Cylinders connecting to existing HW supplies to Sinks, Baths & Showers etc.

The Allmega is an attractive Unit ,easy to install and retro-fit to existing systems and an ideal way to "Save Energy" during the Spring & Summer months when Heating Systems are normally shut down.
Unit SpecificationBuilt-in water tank capacity: 22 imp. gallons (~ 100 litres), expandable
Maximum water temperature: 140C
Maximum hot water production per day: 528 imp. gallons (~2400 litres)
Output: 14,000 BTUs (Hot water)
Output: 10,000 BTUs (Cool air)
COP: 3.0 (Coefficient Of Performance)
Recovery: 22 imp. gallons (~ 100 litres) per hours at 140C *
Dehumidification: 6.60 ~ 8.80 imp. gallons (30 ~ 40 litres) per day at 80% RH *
Water Connection: Water in and out are fitted with 3/4" female pipe thread connections

* Results may vary depending on operating climate.

Electrical Specifications
Volts: 220/240V
Amps: 5.5A
Frequency: 50Hz (60Hz also available)
Power Consumption: 1200W (ON mode)

Dimensions
Height: 120cm
Width: 60cm
Depth: 40cm
Weight: 50 kg

Features
Compact design, saves space
Energy Savings, safe, and zero pollution
Engineered for flexible and easy installation
Reserve tank expandable
Special design, improves the performance in cold weather
Automatic control, high efficiency, and reliable
Virtually maintenance free
2 years limited warranty

T.E.E.M.G. - Solarsaver
36 Meadowfield
Sleaford
NG34 7AZ
United Kingdom
Tel. +44 (0) 1529 304027
Fax. +44 (0) 1529 410491
Email. action@solarsaver.co.uk
Web. www.solarsaver.co.uk

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.