New Zebra OptoProfiler Tool for Solar Cell Bow Topography and Stress Measurements

Sunrise Optical LLC Solar Cell Metrology Tool Manufacturer has added a new 3rd generation Zebra OptoProfiler G3 to its product and services family. The Zebra OptoProfiler is a user-friendly solution for solar cell topography and stress measurements.

Sunrise Optical LLC Solar Cell Metrology Tool Manufacturer has added

a new 3rd generation Zebra OptoProfiler G3 to its product and services
family. The Zebra OptoProfiler is a user-friendly solution for solar cell
topography and stress measurements.

Zebra OptoProfiler is capable of measuring rough structured, painted,
and diffuse reflective surfaces commonly encountered in solar cell
manufacturing. It has capability to measure your solar cells at virtually
every step of the manufacturing process. Range of bow measured
exceeds 10 mm, and does not depend on wafer diameter, while
providing accuracy and reproducibility exceeding 10 sigma of typical
multi-crystalline solar cell manufacturing process window.

Tool has capability to calculate variety of wafer topography parameters such as bow and warp. The stress tensor calculation capability is also
provided as optional software upgrade. The Data collected by Zebra OptoProfiler can be exported in raw point cloud format for display and analysis using popular third party stress and design packages.

Product Features
- Measures wafers from 4-12 inch diameter
- Easy user friendly interface, no special operator training required
- Measures rough, weakly reflective surfaces
- Provides output files in point cloud format

Product Availability

Sample measurement service is now available. Lead-time for tool is currently 4 to 8 weeks ARO.

About Sunrise Optical LLC

Sunrise Optical LLC is an optical metrology company located in Sunrise Florida. It specializes in design and manufacturing of spectroscopic and imaging systems for three-dimensional (3D) image acquisition and development of new algorithms for three-dimensional (3D) image processing. Sunrise Optical LLC is serving the solar cell anufacturing, and thin film metrology markets. More information on Sunrise optical LLC can be found on company website www.zebraoptical.com.

Featured Product

Darfon G320 Microinverter

Darfon G320 Microinverter

The Darfon G320 is the microinverter solution for today's high-power solar modules. The G320 handles 60- and 72-cell modules up to 350W DC and outputs up to 300W AC. The G320's 3-phase configuration accommodates the electrical distribution systems of most commercial buildings and to reduce, if not eliminate, the need for expensive transformers. The G320 comes in four voltage/phase configurations, so it can be installed in residential, commercial or utility applications.