Rehm Thermal Systems Launches New Drying Systems for Solar Cell metallization

Rehm Thermal Systems recently announced the launch of an advanced new series of drying systems for solar cell metallization.

The RDS 2100 and RDS 3000 offer a variety of advanced process features and thermal control that enable PV manufacturers to move their processes to an entirely new level of efficiency and yield.


The drying process consists of a combination of either five or seven IR zones and one central convection zone. This design combination offers temperature profiling that can be adjusted for both precision and flexibility.

These horizontal throughput systems guarantee a safe transport through the oven either via mesh belt or with pin chain up to 3 lanes. In the mesh belt systems, the conveyor of the heating zone can be separated from that of the cooling zone. Consequently, no latent heat is carried into the cooling area which offers a higher cooling gradient and a shorter oven. And at belt speeds up to 6m/minute, the RDS Series provides high throughputs of up to 5700 wph.

The new systems are also available with Rehm's Condensate Residue Management System, a process that controls the buildup of unwanted paste solvent and vehicle residue in the process chamber and extends the maintenance intervals. The entire process chamber of the RDS Series drying systems is designed to be readily accessible for maintenance purposes. The oven opens from the front and comprises removable sheets that can be easily removed for cleaning, significantly reducing the maintenance time and effort.

Rehm Chief Commercial Officer Marc Dalderup explains further. "The Rehm brand name is perhaps not yet widely recognized in the PV manfacturing world, but we have over 200 curing and drying systems in production in factories around the globe right now. Rehm's twenty year history of advanced thermal engineering offers significant best-in-class processing benefits to PV manufacturers, as well as an experienced global support network . "
(Ends)


About Rehm Thermal Systems
Rehm Thermal Systems (www.rehm-group.com) is an international supplier to the photovoltaic and electronics industries, specializing in curing, drying and firing technologies as well as convection and condensation soldering.
Rehm operates vertically integrated manufacturing facilities in Germany, China, and Russia, and technical support facilities throughout Europe, Asia and North America.




Rehm Contact
Marc J. Dalderup
Rehm Thermal Systems GmbH
Leinenstrasse 7
89143
Blauberen, Germany
Tel: +49 7344-9606-0
E-mail : m.dalderup@rehm-group.com
www.rehm-group.com

Protean Marketing Contact
Debbie Gomez
Unit 1, Cutbush Court
Danehill, Lower Earley
Reading,
RG6 4UW, UK
Tel: +44 1189 759880
Email: debbie.gomez@protean.co.uk
www.proteanmarketing.com


Featured Product

Darfon G320 Microinverter

Darfon G320 Microinverter

The Darfon G320 is the microinverter solution for today's high-power solar modules. The G320 handles 60- and 72-cell modules up to 350W DC and outputs up to 300W AC. The G320's 3-phase configuration accommodates the electrical distribution systems of most commercial buildings and to reduce, if not eliminate, the need for expensive transformers. The G320 comes in four voltage/phase configurations, so it can be installed in residential, commercial or utility applications.