Bentek Solar Customers Choose Its Combiners Based on Ease of Installation and Safety Features

The line of basic, smart, disconnect and re-combiners provide the high-quality, ease of installation and safety features that customers require.

SAN JOSE, CA ― June 2010 ― Bentek Solar, a leader in manufacturing and engineering solutions for complex electro-mechanical and power distribution systems for the semiconductor and solar industries, announces that customers are choosing its basic, smart, disconnect and re-combiners based on their high-quality, ease of installation and safety features.

"Bentek Solar's line of solar combiners are designed to meet specific needs for each specific job with the flexibility of adding monitoring capabilities and/or integrated disconnects into the solar combiner. Bentek Solar is sure to have the exact combiner to meet your exacting needs," said Jim Peplinski, Chief Technology Officer of Bentek Solar. "There is ample internal space for ease of installation and plenty of wire bending space per NEC requirements. Our flexibility leads the industry in manufacturing Configure-To-Order (CTO) solar combiners."
Some features of the Solar Combiners include:
• Nema 3R/4 or 4X enclosures, including steel, fiberglass, or stainless enclosures
• RS-485 data communication
• 28A to 400A disconnects
• Rated for continuous duty
• Up to 42 inputs
• Touch-safe fuse holders
• Protective covers on all live parts
• Configured for either positive or negative ground
• Many Configure-To-Order (CTO) options
• UL 1741 listed, CSA 22.2 section 107
For more information about Bentek Solar's combiners or to view online data sheets, please visit www.BentekSolar.com.
###
About Bentek Solar
Founded in 1985, Bentek is a leader in manufacturing and engineering solutions for complex electro-mechanical and power distribution systems for the semiconductor and solar industries. Bentek has applied these extensive capabilities and knowledge into a comprehensive family of standard and configure-to-order (CTO) solar combiner products. These solar combiners provide quality, ease of installation and safety to the solar industry. For more information, contact Bentek Solar at 866-505-0303, e-mail JohnB@bentek.com or visit www.BentekSolar.com.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.