T.R.A MAGE Introduces Their New Ballasted Solar Mounting Solution

T.R.A.-MAGE introduces their new ballasted solar mounting solution. Designed specifically for flat roof installations, T.R.A.-MAGEdesigned the solution to provide professional solar installers a ballasted mounting solution that does not penetrate the roof and keeps the warrantees in place.

American Fork, UT February 21, 2011 -- T.R.A.-MAGE introduces their new ballasted solar mounting solution. Designed specifically for flat roof installations, T.R.A-MAGE designed the solution to provide professional solar installers a ballasted mounting solution that does not penetrate the roof and keeps the warrantees in place.


The solar mounting solutions was designed to limit the time and effort required for installation. The ballasted frames are completely pre-assembled by the manufacturer. All mounting holes are pre-drilled and pre-punched which means they require no on roof fabrication. And, as with all T.R.A.-MAGE SunFIXINGS solutions, they require only one tool for installation. As a result, the solar integrator does not need any special training. All of this makes for quicker installations saving installers time and money.

T.R.A.-MAGE's SunFIXINGS line even accounted for water drainage issues that many other flat roof solar mounting systems cause. Mounted to the bottom of the frames are riser feet that lift the mounts off the roof so there is no interference with normal drainage, no other manufacturer offers this feature. And since the frames are available in 10, 20, 30 and 40 degree inclinations they guarantee optimal energy production out of any solar project regardless of where it is installed.

T.R.A-MAGE's SunFIXINGS ballasted mounting solution is the perfect solution to any flat roof installation.

T.R.A.-MAGE, Inc., CONNECTING TO ENERGY

T.R.A.-MAGE is a manufacturing firm in American Fork engaged primarily in the production of roof accessory systems. They design and produce the finest solar mounting systems in the industry for use with photovoltaic and thermal systems. Their systems are designed to allow solar panels to be easily installed on nearly any style of roof or roofing material. T.R.A.-MAGE is a local company leading the way in solar energy systems.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.