DEDICATED ELECTRICAL TEST KIT FOR SOLAR PV INSTALLATION

The new Seaward Solar Installation PV100 is the first dedicated multi-function electrical tester for those involved in solar panel installation. The new tester is capable of carrying out all electrical tests required by IEC 62446 on grid connected PV systems and eliminates the need for multiple test instruments for PV solar panel electrical installation and connection. With the push of a single button the new combination tester carries out the required sequence of electrical tests in a safe and controlled manner, avoiding the risk of contact with exposed live DC conductors.

The new Seaward Solar Installation PV100 is the first dedicated multi-function electrical tester for those involved in solar panel installation.


The new tester is capable of carrying out all electrical tests required by IEC 62446 on grid connected PV systems and eliminates the need for multiple test instruments for PV solar panel electrical installation and connection.

With the push of a single button the new combination tester carries out the required sequence of electrical tests in a safe and controlled manner, avoiding the risk of contact with exposed live DC conductors.

The rugged and robust Seaward Solar Installation PV100 is hand held and battery operated for maximum portability. The supplied MC4 and Sunclix test leads allow it to be connected quickly, easily and safely to all standard PV modules and arrays to test earth continuity insulation resistance open circuit voltage and short circuit currents.

All required measurements are performed automatically and displayed clearly with confirmation of whether the test results are acceptable. The instrument will also compare the performance of multiple strings and indicate whether the open circuit voltage or short circuit current measurements deviate by more than 5%.

An AC/DC current clamp is provided for the measurement of operation currents and the complete test kit, including all test probes alligator clips, Sunclix and MC4 adaptor leads is supplied in a convenient carrying case.

In addition a special SolarCert Elements manual entry PC software program is available for the recording of test data and the production of professional inspection reports and test certificates.

ENDS

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.