Without drilling, without ballast- Roof Top project at Monash University completed

Clenergy is pleased to announce that the roof top project at Monash University, Clayton Campus, in Australia has been completed by Maxim Renewable using the innovative PV-ezRack SolarRoof interface for Klip-Lok type roofing.

Clenergy is pleased to announce that the roof top project at Monash University, Clayton Campus, in Australia has been completed by Maxim Renewable using the innovative PV-ezRack SolarRoof interface for Klip-Lok type roofing. The project consists of eight sub arrays with a total capacity of 153kW.


The Clenergy Klip-Lok interface provides an easy and inexpensive way to mount on Klip-Lok type roofs without penetrations. No rails were used in the installation and no holes were drilled through the roof. Solar modules were fixed with clamps directly to the Clenergy interface, which are secured firmly onto the roof rib.

"The interface for Klip-Lok type roofs is designed with EPDM rubber with the benefits of high corrosion resistance and with the maximum possible lifespan," said the product manager for PV-ezRack mounting systems, Thomas Gerstch, "It is compatible with Clenergy's tilt legs allowing tilt angles from 15 to 60 degree to maximize the system performance."

Technical Data:
Roof Type: KlipLok 406, KlipLok 700, Speed Deck Ultra
Mounting Method: Clamping
Colour: Silver
Compatibility: Tilt Legs, L Feet, Inter Clamp, End Clamp
Material: AL/6005-T5, EPDM rubber
Warranty: 10 years*


More information about Clenergy's PV-ezRack mounting systems, please contact sales@clenergy.com.au

Featured Product

OutBack Power - Radian series Inverter/Charger and Integrated Battery Rack

OutBack Power - Radian series Inverter/Charger and Integrated Battery Rack

Off-grid or on-grid, system designers and installers now have a comprehensive power conversion and storage solution from the name they trust: OutBack. Engineered from the ground up, OutBack's preassembled systems make balance-of-system components easier to specify and install in any residential or commercial installation. The Radian packs over 8,000 Watts of pure sine-wave continuous power and can be stacked into an 80 kW configuration for larger applications. The Integrated Battery Rack (IBR) is a 28.8 kWh one-box solution with all electrical connections made at the factory and shipped fully-assembled (without batteries) for quick connection on the jobsite.