Symmetrical Boost Concept for Solar Applications up to 1000V - an Article by Vincotech

Symmetrical Boost Concept for Transformer-less solar inverter applications

November 21st 2011 - In a transformer-less solar inverter application the symmetry of split supply DC voltages with ground is an important issue. The concept described in this article shows the handling of both the input and the output asymmetry in an MPP booster circuit.


There are two different example concepts. The first example demonstrates how to connect solar panel strings with different power and intensity conditions on a solar inverter environment. There is also the possibility to combine panels with different power and MPP characteristics within the booster.
For more information please see Vincotech's "Symmetrical Boost Concept for Solar Applications up to 1000V:
http://www.vincotech.com/news/articles/symmetrical-boost-concept-for-solar-applications-up-to-1000v.html?campaign_id=SMB4Solar

About Vincotech:
Vincotech, an independent operating unit within Mitsubishi Electric Corporation, is a market leader in power modules in development and manufacturing of high-quality electronic power components for Motion Control, and Renewable Energy applications.
With some 500 employees worldwide, backed by vast experience and a long history in electronics integration, Vincotech leverages these assets to help customers attain maximum market success.
For more information please see: www.vincotech.com

Media Contact:
Michael Frisch,
Email:michael.frisch[at]vincotech[dot]com,
Tel: +49 89 878067142

Distributed on behalf of Vincotech GmbH by NeonDrum news distribution service (http://www.neondrum.com)

Featured Product

The Solar Fastener Expert by Mudge Fasteners. Your Source for Solar Industry-Related Hardware

The Solar Fastener Expert by Mudge Fasteners. Your Source for Solar Industry-Related Hardware

3M™ Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications. The backing on this tape is an ionomer film that is very tough yet flexible and abrasion resistant. The very soft and thick acrylic adhesive has excellent sealing properties and good outdoor durability. This single coated tape is designed to seal over an existing joint, seam, or penetration. The adhesive is designed to adhere well to the ionomer film so that overlapping tape joints can be made while maintaining a strong seal. 3M™ Extreme Sealing Tape - instant sealing that rolls on fast and looks good.