Powerway Solar Mounting for Concrete Roof Power Project

Powerway solar mounting has designed a special PV mounting system for installation on the roofs of concrete houses. It includes beams, rails, rear posts, hinge bases, U-connector, articulation piece, side and mid clamps, concrete foundations and hardware. The beam, rail and posts are all made of U-t

Powerway solar mounting has designed a special PV mounting system for installation on the roofs of concrete houses. It includes beams, rails, rear posts, hinge bases, U-connector, articulation piece, side and mid clamps, concrete foundations and hardware. The beam, rail and posts are all made of U-type steel.


This cement roof mounting system is characterized by its unified material, simple installation and wide, adjustable slot hole. All the steel mountings have been surface treated with the hot-dip galvanizing process, which improves the bearing capacity of construction and the entire system's stability. In addition, our company stresses that such a project will need to take into account the parapet height, and distance between module and parapet during arrangement of modules, to ensure stability and system safety.

Powerway has completed numerous solar projects and developed advanced concrete mounting system technology that is widely used, and has won the trust and praise of our customers.

Read more from: http://www.pvpowerway.com/en/

Featured Product

OutBack Power - Radian series Inverter/Charger and Integrated Battery Rack

OutBack Power - Radian series Inverter/Charger and Integrated Battery Rack

Off-grid or on-grid, system designers and installers now have a comprehensive power conversion and storage solution from the name they trust: OutBack. Engineered from the ground up, OutBack's preassembled systems make balance-of-system components easier to specify and install in any residential or commercial installation. The Radian packs over 8,000 Watts of pure sine-wave continuous power and can be stacked into an 80 kW configuration for larger applications. The Integrated Battery Rack (IBR) is a 28.8 kWh one-box solution with all electrical connections made at the factory and shipped fully-assembled (without batteries) for quick connection on the jobsite.