Solar Carport

If you are looking for an option to protect your cars against the elements, Green Sun Rising has just the right product for you: Our Solar Carport not only covers your vehicles against snow, rain, hail and sun but also generates enough clean electricity to charge your vehicle.

If you are looking for an option to protect your cars against

the elements, Green Sun Rising has just the right product for you:

Our Solar Carport not only covers your vehicles against snow,
rain, hail and sun – with an OPA microFIT* contract you will also
generate attractive income, producing electricity and feeding it
into the grid. With a microFIT contract, your carport will more than
pay for itself!

We offer a 2-car-version of our carport, but there are no limits to
the size thanks to our modular design.
2-, 4- or 6-car-versions are possible under the microFIT program.
We will customize your larger FIT-size solution.

The roof of the carport is covered with 250W polycrystalline PV
modules, generating at least 4.5kW DC solar power and higher,
depending on size.
We offer a 25 year Linear Power Warranty for our modules.

The material of the actual structure is durable galvanized steel, it
can either be mounted on a concrete or asphalt surface, sunk in
the ground or mounted on sonar tubes.
For the PV modules, we use our own approved mounting system
mounts4solar. For the formed side channels you can chose your
own colour, even advertising can be included on the channels.

If you have an electric vehicle, we offer our solar carport with a
level 1 or level 2 EV charging station attached.

We are fully compliant with OPA domestic content requirements.

Please enquire about our attractive prices for turnkey systems.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.