Li-ion Battery Costs Fall to $397/kWh in 2020; Not Enough for Mass Adoption of Electric Vehicles

Scale-up alone is unlikely to drive costs low enough for mass adoption, so Lux Research describes the best innovations for reducing battery cost

BOSTON--Early demand for electric vehicles and plug-in hybrid electric vehicles has fallen short of optimistic projections, as vehicles like the Chevy Volt have missed sales targets. The key to growing the market is reducing the cost of Li-ion batteries, according to a Lux Research report. While larger-scale production will help reduce costs, the effect of scale-up and likely technology improvements bring nominal battery pack cost only to $397/kWh in 2020 – far short of the $150/kWh target from the U.S. Advanced Battery Consortium (USABC) and not enough to reach the mass market.

"Materials Innovation and Cost Cutting Strategies for Li-ion Batteries in Transportation"

"Vehicle applications demand a different scale in both size and performance, and no other incumbent technology combines the power and energy performance of Li-ion batteries," said Kevin See, Lux Research Analyst and the lead author of the report titled, "Searching for Innovations to Cut Li-ion Battery Costs."

"Plug-in vehicles' fates are tied to the cost of Li-ion batteries, so developers need to focus on the innovations that have biggest impact on cost," he added.

To see what technologies can impact Li-ion battery cost, Lux Research studied the cost structure of Li-ion batteries, and considered the innovations that could drive disruptive decreases in cost necessary to spur growth of the electric vehicle market. Among their conclusions:

Materials improvement and scale are insufficient to cut costs. While scale does have a significant impact in driving costs down, it is not likely to lead to a disruptive drop in battery pack costs unless coupled with other innovations.
Cathodes remain the biggest target. Cathode capacity and voltage improvement hold much more value than anode innovation. In the optimal case, with a maximum voltage increase of 1V and capacity increase of 200 mAh/g, the nominal pack cost dropped 20%.
Beyond Li-ion remains a focus. Technologies such as Li-air, Mg-ion, Li-S and solid-state batteries push past the limitations of Li-ion batteries and achieve higher energy densities and specific energies. Each technology has its supporters – PolyPlus and IBM for Li-air, Toyota for Mg-ion, Sion Power and BASF for Li-S and Sakti3 for solid state batteries but all face significant obstacles. A clear leading contender that can meet strict requirements on cycle life, power performance, and manufacturability has yet to emerge.

For more information, please click here to register for the complimentary Lux Research webinar, "Materials Innovation and Cost Cutting Strategies for Li-ion Batteries in Transportation," on April 3rd at 11:00 EDT.

The report titled, "Searching for Innovations to Cut Li-ion Battery Costs," is part of the Lux Research Electric Vehicles Intelligence service.

About Lux Research

Lux Research provides strategic advice and on-going intelligence for emerging technologies. Leaders in business, finance and government rely on us to help them make informed strategic decisions. Through our unique research approach focused on primary research and our extensive global network, we deliver insight, connections and competitive advantage to our clients. Visit for more information.

Featured Product

The Solar Fastener Expert by Mudge Fasteners. Your Source for Solar Industry-Related Hardware

The Solar Fastener Expert by Mudge Fasteners. Your Source for Solar Industry-Related Hardware

3M™ Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications. The backing on this tape is an ionomer film that is very tough yet flexible and abrasion resistant. The very soft and thick acrylic adhesive has excellent sealing properties and good outdoor durability. This single coated tape is designed to seal over an existing joint, seam, or penetration. The adhesive is designed to adhere well to the ionomer film so that overlapping tape joints can be made while maintaining a strong seal. 3M™ Extreme Sealing Tape - instant sealing that rolls on fast and looks good.