FUGRO TO LAUNCH SEAWATCH WIND LiDAR BUOY AT GLOBAL OFFSHORE WIND

Fugro (Stand 399) has chosen Global Offshore Wind 2012 (which opens in London tomorrow – 13 June) for the launch of the Group's new SEAWATCH Wind LiDAR Buoy, which represents the next generation of multi-purpose buoys tailored for the renewable energy industry.

Trondheim, Norway: Fugro (Stand 399) has chosen Global Offshore Wind 2012 (which opens in London tomorrow – 13 June) for the launch of the Group's new SEAWATCH Wind LiDAR Buoy, which represents the next generation of multi-purpose buoys tailored for the renewable energy industry.


The new buoy is the result of a successful joint industry R&D project utilising offshore and wind technology expertise from Norwegian universities, research institutes, the energy company Statoil and Fugro OCEANOR. It accurately measures the speed and direction of wind across the diameter of wind turbine rotors in profile up to 300m heights, whilst additional oceanographic sensors measure ocean waves and current profiles.

Validation of the Wind LiDAR Buoy took place at an exposed location off the coast of Norway. The tests were designed to compare wind data collected by the buoy to data from a similar LiDAR located on land and from a fixed met tower. Wind velocities up to 20 m/s and wave heights up to 5 metres were recorded. The average deviation in wind speed measurements between the Wind LiDAR Buoy and the reference stations was less than 2%.

"We are confident that this new buoy provides a cost-effective and reliable solution for measuring wind profiles, waves and current profiles," says Olaf Sveggen – Sales Director at Fugro OCEANOR. "It is a smaller and more cost-effective alternative to existing fixed or larger floating wind profile solutions. It's built on the SEAWATCH Wavescan platform deployed by Fugro OCEANOR and other Fugro Group companies for a large number of satisfied clients in the most hostile oceanographic environments since 1985. Its well-proven technology includes the GENI™ controller, an intelligent power management unit and the ZephIR LiDAR."

The ZepIR LiDAR was selected after years of testing and comparison of various concepts. The ZephIR 300 provides highly accurate measurements across the entire rotor diameter and beyond, and can be configured to measure up to 10 different heights from 10 to 300 metres. Low power consumption of the ZephIR 300 and intelligent power management are key to efficient operation when using a small low-cost platform.

A full list of features of the new buoy is available from Stand 399; and from www.oceanor.com
For more information please contact: Olaf Sveggen, Sales Director – Fugro OCEANOR, o.sveggen@oceanor.com



Fugro OCEANOR
Pir-Senteret
N-7462
Trondheim
Norway
Tel:+47 73545200
Fax: +47 735 45201
Email: trondheim@oceanor.com

Featured Product

WS510 Secondary Standard

WS510 Secondary Standard

In the monitoring of large photovoltaic (Utility Scale), in assessing potential sites (Solar-assessment), or in up and coming electricity cost saving initiatives projects (Commercial & Industrial), the WS510 now provides the market a secondary standard pyranometer, ultrasonic wind speed, ultrasonic wind direction, temperature, pressure and humidity all in a single unit.. This sensor meets the high demands of the world meteorological organization (WMO) through the active valving at air temperature measurement and the inertia- and maintenance-free measurement of wind speed and wind direction on the ultrasonic principle. Equipped with a Kipp & Zonen pyranometer of the secondary standards, the WS510-UMB Compact weather sensor from Lufft unites the precision of a variety of meteorological individual sensors in a single all-in-one device, for the first time.