The World Premiere of the first Clenergy PV Mounting System PV-ezRack Trapezoidal for all Trapezoidal Sheet Roofs

Clenergy introduces the PV-ezRack Trapezoidal, the company's new high-quality universal mounting system for PV-systems on trapezoidal sheet roofs with thicknesses of 0.4mm and above. The system is made of anodised aluminium rails with an EVA coating and special screws that enable it to be screwed in without chipping. The Clenergy system is quick and easy to mount and has a high load capacity. It will celebrate its world premiere at the Intersolar 2012 exhibition and will then be available on the market from summer 2012 onwards.

Clenergy's new PV mounting system PV-ezRack Trapezoidal is suitable for fixing frame modules onto all common trapezoidal sheet roofs with thicknesses of 0.4mm and at angles of 10° and above. It consists of a short guide rail and can be installed on raised beads that are as little as just 20mm wide thanks to its mounting form. As is also the case with all of its components, the system material consists of weatherproof and corrosion-resistant anodised aluminium rails. The EVA coating on the underside of the system and three pre-drilled fixing holes guarantee fully rainproof mounting and an optimally high load capacity. Depending on the thickness of the sheet roof, stainless steel screws with special cutter heads can be used to enable the system to be screwed in without chipping.


The system, which is supplied in its finished pre-assembled form, also comes with Clenergy's patented Z-module clips that can be simply clipped on from above. The small number of components that come with the system enables it to be rapidly mounted in no time at all. The fact that only a few components are required also enables retailers and wholesalers to benefit from favourable transportation and storage costs.

Featured Product

GreenFasten™ solar panel roof mount hardware, watertight, USA made

GreenFasten™ solar panel roof mount hardware, watertight, USA made

The GreenFasten™ - GF1 system utilizes the patented watertight technology EcoFasten Solar® is known for. The flashing is fit with our EPDM rubber bushing and when used with a compatible EcoFasten Solar compression bracket (milled with countersink), a watertight seal is created, which protects the integrity of the roof. Requiring just a single fastener (lag bolt or self-drilling), GreenFasten provides the fastest install in the industry and will not void roofing manufacturer's warranties. Backed by IAPMO certification, GreenFasten delivers a mounting solution for all new or existing (retrofit) composition shingle roofs, and is the most cost-effective solution available. Like all of the solar roof mount solutions in our line of products, GreenFasten is made in the USA using recycled materials.