RTI International Develops New Low Cost, High Efficiency Solar Technology

Preliminary analysis of the material costs of the technology show that it can be produced for less than $20 per square meter—as much as 75 percent less than traditional solar cells.

RESEARCH TRIANGLE PARK, N.C. – Researchers at RTI International have developed a new solar technology that could make solar energy more affordable, and thus speed-up its market adoption.


The RTI solar cells are formed from solutions of semiconductor particles, known as colloidal quantum dots, and can have a power conversion efficiency that is competitive to traditional cells at a fraction of the cost.

Solar energy has the potential to be a renewable, carbon-neutral source of electricity but the high cost of photovoltaics – the devices that convert sunlight into electricity – has slowed widespread adoption of this resource.

The RTI-developed solar cells were created using low-cost materials and processing techniques that reduce the primary costs of photovoltaic production, including materials, capital infrastructure and energy associated with manufacturing.

Preliminary analysis of the material costs of the technology show that it can be produced for less than $20 per square meter—as much as 75 percent less than traditional solar cells.

"Solar energy currently represents less than 1 percent of percent of the global energy supply, and substantial reductions in material and production costs of photovoltaics are necessary to increase the use of solar power," said Ethan Klem, a research scientist at RTI and co-principal investigator of the project. "This technology addresses each of the major cost drivers of photovoltaics and could go a long way in helping achieve that goal."

The technology was recently featured in a paper published in Applied Physics Letters.

In demonstration tests, the cells consistently provided a power conversion efficiency more than 5 percent, which is comparable to other emerging photovoltaic technologies.

"The efficiency of these devices is primarily limited by the amount of sunlight that is absorbed," said Jay Lewis, a senior research scientist at RTI and the project's other principal investigator. "There are many well-known techniques to enhance absorption, which suggests that the performance can increase substantially."

The cells, which are composed of lightweight, flexible layers, have the potential to be manufactured using high volume roll-to-roll processing and inexpensive coating processes, which reduces capital costs and increases production. Unlike traditional solar cells, the RTI-developed cells can be processed at room temperature, further reducing input energy requirements and cost.

In addition to being low-cost, the new cells have several other key benefits, including higher infrared sensitivity, which allows the cells to utilize more of the available solar spectrum for power generation.

About RTI International

RTI International is one of the world's leading research institutes, dedicated to improving the human condition by turning knowledge into practice. Our staff of more than 2,800 provides research and technical expertise to governments and businesses in more than 40 countries in the areas of health and pharmaceuticals, education and training, surveys and statistics, advanced technology, international development, economic and social policy, energy and the environment, and laboratory and chemistry services. For more information, visit www.rti.org.

Featured Product

WS510 Secondary Standard

WS510 Secondary Standard

In the monitoring of large photovoltaic (Utility Scale), in assessing potential sites (Solar-assessment), or in up and coming electricity cost saving initiatives projects (Commercial & Industrial), the WS510 now provides the market a secondary standard pyranometer, ultrasonic wind speed, ultrasonic wind direction, temperature, pressure and humidity all in a single unit.. This sensor meets the high demands of the world meteorological organization (WMO) through the active valving at air temperature measurement and the inertia- and maintenance-free measurement of wind speed and wind direction on the ultrasonic principle. Equipped with a Kipp & Zonen pyranometer of the secondary standards, the WS510-UMB Compact weather sensor from Lufft unites the precision of a variety of meteorological individual sensors in a single all-in-one device, for the first time.