UltraGTS Greywater-Grey Water Treatment System Australia Filtration Reuse Use Wastewater Australia

The ultraGTS is a modern state of the art Greywater Treatment System which has undergone rigorous testing by Authorities and far exceeded all water quality standards.Greywater, Grey Water Treatment, Grey Water System, Grey Water, Greywater Tank, UltraGTS, Grey Water Systems, Greywater Systems

The UltraGTS is a Latest technology of state of the art Ultragts, Grey water Systems, Greywater Systems, Grey Water System, Greywater System, Gray Water Systems, Grey Water Treatment, Grey Water Filtration, GreyWater Tank, Grey Water Recycling Systems, GreyWater Recycling System, Grey Water Reuse, GreyWater Use, WasteWater Australia, Grey Water, GreyWater Greywater Treatment System which has undergone rigorous testing by Authorities and far exceeded all water quality standards. What is Grey water: Greywater is water generated by Bath, Shower, Hand basins , Laundry, Your Kitchen Sink and Toilet remain connected to the sewer.

[Ultragts and Wastewateraustralia, ] Ultragts and Wastewateraustralia.
\UltraGTS Grey Water I Grey Water Systems I Grey Water Reuse I
Grey Water Tank." journalgin.

UltraGTS is certified by NSW – Health department of Environmental Health Domestic Greywater Treatment System Subject: Grey water Treatment Systems - ultraGTS grey water treatment system
Summary: The ultraGTS greywater treatment system is designed to treat the greywater waste stream from the shower, bath, laundry and basin from a residential dwelling occupied by a maximum of 10 persons. The ultraGTS greywater treatment system is assembled within an above ground roto moulded heavy duty polyethylene tank with a capacity of 500 liters. The treatment tank contains the membrane filter module and diffuser assembly pipe system along with the working level float switch. File link: Certificate of Accreditation.

For More information Please Ring here: 0434553182 or Visit Online: http://www.ultragts.com.au

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.