Array Technologies' Trackers Shown to have Lowest Cost of Ownership Driven by Highest Reliability per Independent Report

Analysis shows Arrays tracker to have unscheduled maintenance events once per year compared to twice per day for competing architecture, and significantly reduced structural risks

ALBUQUERQUE, NM - September 8, 2017 - Array Technologies, the worlds most trusted name in solar tracking, recently announced results of an independent analysis by TÜV Rheinland PTL LLC (TÜV). The in-depth study indicates that Arrays flagship tracker, the DuraTrack® HZ v3, delivers 4 Cents/Watt DC higher Net Present Value (NPV) and 6.7% lower Levelized Cost of Energy (LCOE), driven by 37% lower lifetime O&M costs.


The analysis found that Arrays architecture has higher structural integrity. With a patented mechanical load-release system, Arrays trackers are less susceptible to torsional galloping and consequential damage to solar modules. The DuraTrack HZ v3 withstands high wind loads in all positions, unlike architectures that rely on active stow and a complicated chain of electronic, radio, and motor systems to survive.
TÜV analysts performed an economic and risk analysis of two tracker architectures: one driven by a single motor linked by a rotating driveline to multiple tracker rows; and another where tracker rows operate as self-contained units, each with a dedicated photovoltaic (PV) panel, battery, motor and other system components. TÜVs analysis includes descriptions of the technical characteristics of each system, followed by a Failure Modes and Effects Analysis (FMEA) to determine high-risk components. A cost of failure analysis of those components was performed, concluding with a LCOE / NPV analysis to assess the economic impact of the two technologies on developers, owners, financiers, and insurers of utility scale solar power plants.

"Reliability is the cornerstone of responsible solar industry growth," said Array Technologies CEO and founder, Ron Corio. "Without dependable PV modules and tracking systems, the solar industry will struggle to continue down its path of innovation and expansion. This third-party validation from TÜV confirms what we have been claiming for nearly 30 years: that the engineered simplicity in our trackers truly is the best long-term option for solar project owners."

The DuraTrack HZ v3 is currently available to solar project developers. For more information about the tracker or the results of the TÜV study, please visit: http://www.arraytechinc.com/tuv-report-findings/

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.