SBS®75G is available as a genderless wire housing or a right angle PCB connector.

Anderson Power Products (APP), a leader in high power interconnect solutions, announces a new addition to the SBS® connector family with the release of their new 3 pole SBS®75G connector. The SBS® connector family features PCB-to-wire and wire-to-wire solutions for up to 110 amps. Low resistance silver plated contacts for wire sizes from #6 AWG (16 mm) to 16 AWG (1.5 mm) are held inside compact and ergonomic housings with a touch-safe interface. SBS®50 has two power positions, while the SBS®75X also has 4 auxiliary power/signal positions. The new SBS®75G connector is a 3 pole connector with a first-mate / last-break center position, UL rated for ground or power.

SBS®75G is available as a genderless wire housing or a right angle PCB connector. The SBS®75G has a mating interface that is touch-safe in all three positions, providing protection to the user by eliminating finger contact with live circuits per IEC60950. This feature is required by UL for use in systems operating above 30 volts, where risk of shock can be health threatening in the presence of moisture. The genderless design allows both sides of the connection to be touch safe, which is valuable in applications involving batteries, capacitors, or cord sets functioning as a jumper.

The right angle PCB connector has a compact power to size ratio that maximizes available PCB real estate. Press fit retainers on the housing secure and correctly position the connector to the PCB prior to soldering. SBS®75G PCB connector is sold as a fully assembled connector ready to pick and place for solder termination.

About Anderson Power Products
Anderson Power Products® is a leader in developing high quality, low cost, power interconnect solutions for industries including: Back Up Power Systems, Electrical Vehicles, UPS Systems, Telecommunications High-Technology Devices and Alternative Energy Solutions. Headquartered in Sterling, MA, Anderson Power Product's facility is ISO 9001:2008 certified and uses automated manufacturing to offer uncompromising quality. In addition, APP operates a distribution and assembly facility in Warrington, England to provide support for their European customers, as well as three Asia Pacific facilities: Shenzhen, China, Shatin Hong Kong and Taichung City 407, Taiwan (R.O.C.).

APP® connectors are available through their authorized distributor network or direct from the factory. For further information about the company and its products, call 978-422-3600 or visit

Featured Product

Iron Edison Lithium Iron Battery

Iron Edison Lithium Iron Battery

Iron Edison's Lithium Iron battery is for solar PV energy storage and compatible with 12-volt, 24-volt and 48-volt battery-based inverters. Available in a wide range of residential storage capacities, custom high-voltage models are also available for commercial applications like peak load shaving and UPS. Iron Edison's battery uses Lithium Iron Phosphate cells (LiFePO4), known to be the safest type within the lithium-ion family. Iron Edison's battery includes an integrated Battery Management System and DC disconnect for maximum safety. All components are housed inside a steel enclosure with removable lid.