SGS Gives Successful QHSE Presentation at Renewable UK (RUK) Health & Safety Conference in Sheffield
SGS successfully held a presentation on quality, health, safety and environment (QHSE) in wave and tidal projects at the Renewable UK (RUK) Health and Safety Conference in Sheffield on January 31, 2013.
Jim Green, SGS Global Renewables QHSE Manager, gave a successful presentation on quality, health, safety and environment (QHSE) in wave and tidal projects as a guest presenter at the January 2013 Renewable UK (RUK) Health and Safety Conference held in the English city of Sheffield. The presentation specifically focused on safety in the marine environment and highlighted the need for applied construction design and management to reduce overall risk. During his talk, Jim emphasized the necessity for the production of risk registers and mitigation against catastrophic failure which have, in the past, been a cause of concern within the wave and tidal prototype sector.
Renewable UK (RUK) Health & Safety Conference
Organized by Renewable UK, the United Kingdom's leading not-for-profit renewable energy trade association, the 9th Annual Renewable UK Health and Safety conference attracted many industry leaders and was a complete success.
Jim Green Talks Safety for Wave and Tidal Projects
Companies developing devices are now well aware of the health and safety (http://www.sgs.com/en/Energy/Quality-Health-Safety-and-Environment/Health-and-Safety.aspx) risks associated with the development, manufacture and deployment of both prototype and proven devices implemented in wave and tidal projects. Such devices can be highly problematic, complex and subject to catastrophic failure. Jim's presentation identified significant risks and suggested actions to be taken to minimize those risks.
Projects following Construction, Design and Management Regulations 2007 (CDM) policies mandate that well-defined processes are adopted by the developer and other responsible project partners. The client, designer, the construction, design and management coordinator (CDM-C), the principal contractor (PC) and general contractors all have specific duties to fulfill. In order to have the ability to comply with standards required to meet legal obligations, clients are called upon to appoint a competent principal contractor. In the design stage, a design risk analysis with consideration of the harsh marine environment and a failure mode analysis are conducted to identify and minimize potential risks.
Once the partner roles have been assigned and preliminary analysis is completed, critical health and safety (H&S) documentation such as the Pre-Construction Information Plan, Construction Phase Plan, Risk Analysis Management Systems (RAMS) and the Health and Safety File must be submitted. Only then are CDM zones set allowing appropriate RAMS to be put in place and arrangements for Marine Coordination and Active Safety Management Systems to be made. These precautions in safety and emergency procedures are to be implemented in the planning and maintenance programs for offshore, onshore and intertidal projects as well as sea route CDM corridors to offshore sites to raise the health and safety culture of the principal contractor to the highest possible standards in order to avoid preventable failures and accidents.
When one considers the overwhelming inherent risks to be avoided, it is clear that the highest of standards for principal contractor and client management systems must be met and maintained. This requires careful interface management to expeditiously close dangerous gaps. Workshops and mentoring programs for principal contractors can be helpful tools in ensuring quality safety measures. In cases where initial mobilization doesn't go particularly well and incidents occur, staff may have to be retrained or removed from the project. Early appointment of a qualified and experienced CDM-C supported by the client can result in the adoption of a systematic approach achieving success without incidents or problems.
Construction Design & Management Regulations 2007
Required by law, CDM is probably the most important mandated management tool to significantly impact risk reduction and positively influence the business risk model. The emphasis should be on planning and control supported with auditing and inspections.
SGS Quality, Health, Safety and Environment (QHSE) Services
SGS fully understands the aspects of quality management key to increased productivity. Customer satisfaction, increased effectiveness, maximum output and quality control are the building blocks of success. The SGS community of specialists is dedicated to providing training, auditing and certification services to ensure that quality management systems are effective and in accordance with the highest global criteria. SGS enjoys the largest network of highly-skilled and extensively experienced auditors, trainers and inspectors worldwide with facilities and laboratories around the globe available round the clock. SGS strives to provide clear assessments of processes and organization to empower and encourage staff to consistently put quality first.
SGS thanks Jim for his informative and important presentation putting marine environment QHSE (http://www.sgs.com/en/Energy/Quality-Health-Safety-and-Environment.aspx) issues at the forefront of the planning and execution of such extraordinary projects.
For further information, please contact:
SGS Industrial Services
QHSE Service Manager
t: + 44 (0) 150 585 0662
m: + 44 (0) 7960 436350
SGS is the world's leading inspection, verification, testing and certification company. SGS is recognized as the global benchmark for quality and integrity. With more than 75,000 employees, SGS operates a network of over 1,500 offices and laboratories around the world.
Get an efficient power supply system based on lithium technology and receive 12V/24V and 230V/50Hz simultaneously.
The Clayton Power lithium battery system can be charged from the mains via a G3 Combi - inverter/charger, an alternator while driving or from other power sources.
Our lithium ion batteries can be connected in parallel to achieve scalable power capacity and output. Connect more inverters or inverter/chargers to get a greater 230V output and even faster charging times.
The G3 Combi - Inverter/Charger series, is a combined 230V power supply and intelligent multi charger in one compact unit.
Lithium Ion Batteries
Built-in Battery Management System. 12V and 24V - 100Ah. Scalable up to 2000Ah.
+ Powerful + Low weight + Long lifetime + Fast charging
Clayton Power | Lithium Battery Systems for Mobile, Off-Grid and Storage Solutions