SGS is currently executing the tendering phase and has received a Letter of Intent for owner's engineer representative and supervision services for three wind farm sites in Poland from Polish Energy Partners (PEP).
SGS received a Letter of Intent for owner's engineer representative and supervision services for three wind farm sites totaling 106 MW from Polish Energy Partners (PEP) in February 2013. A contract contingent upon approved financing is scheduled to be signed in May.
Currently, SGS is executing the tendering phase, selecting Balance of Plant (BoP) contractors and will proceed as owner's engineer and perform on-site supervision at the time of signing. The project, slated for a May 2013 start, is expected to be completed in June or July of 2014.
Polish Energy Partners, a leader in renewable energy sources projects, is an expert in the fields of development, implementation and operations of projects related to the production of electricity, heat and fuels. SGS has previously served PEP at two other wind farm locations with a total of 58 MW and will assign up to six SGS specialists to this project.
Due to its expertise in renewable energy projects and extensive experience delivering owner's engineer services, SGS won the bidding.
SGS Pre-Construction Services
During the pre-construction phase of the wind farms development, SGS is assisting PEP in all processes and properly executing work controlling quality and following timetables. Acting as technical advisor, SGS is providing technical due diligence (http://www.sgs.com/en/Energy/Energy-Sources/Wind/Services-in-the-In-Service-Phase/Technical-Due-Diligence-for-Renewable-Energy-Projects.aspx) of project documentation including risk specification. SGS specialists are preparing the initial environmental reports, assessments and impact studies. Pre-construction road surveys and reports are also being carried out and drawn up to determine project impact on infrastructures. SGS is coordinating the design of the wind farms, determining site suitability and assessing wind energy yields, measuring wind by monitoring and collecting data and confirming measure masts from an outsourced provider. SGS is modeling wind farm designs, verifying data and reporting outcomes.
SGS experts are issuing tendering documentation for BoP and electrical contractors, preparing quotations and evaluations of project costs and leading negotiations during contractor selection. According to the current agreement, SGS is providing technical assistance, writing specifications, SIWZ, PFU and appendices to project contracts and verifying turbine manufacturers, site suitability and grid code requirements.
SGS Services During Construction
Upon signing the contract for owner's engineer services (http://www.sgs.com/en/Energy/Power-Distribution/Construction/Contract-Engineer-Services.aspx) in May, SGS duties will substantially increase during the construction phase. Skilled SGS experts will be responsible for the coordination and organization of work including thorough reporting and site supervision according to construction laws. Furthermore, SGS expert technicians will verify design, assess risk, conduct site works supervision, FAT tests, mechanical completion inspections and provide technical assistance throughout the construction of each project. SGS supervisors will strive to meet scheduled PEP deadlines and stay on project budget while guaranteeing compliance and coordinating measures to obtain necessary permits. SGS will deliver compulsory documentation to banks, authorities and institutions, record construction supervision and maintain log books.
SGS will also supply personnel mandated by construction laws and regulations including a legal site manager and inspectors in all areas. Equally important, SGS will provide the PEP project with necessary staff such as machine and turbine specialists, geologists, surveyors and optional scientific staff. During all phases of construction, SGS health and safety experts will supervise the creation and implementation of site-specific health and safety plans. SGS supervisors will oversee quality assurance and experienced SGS liaisons will coordinate commissioning agreements and supervise commissioned partners.
In addition, SGS experts will conduct pre-and post-assembly 3D laser scanning dimensional tests of wind turbine generator components such as blades, nacelles and hubs to identify defects, to confirm optimal geometry or to expose damage due to wear and tear on both mechanical and non-mechanical components. And, upon client request, SGS will prepare technical documentation required to obtain concessions necessary to produce electricity including diagrams and descriptions of the measuring systems. SGS officials are authorized to act on behalf of PEP in certain administrative situations. In order to successfully carry out the enormous task of owner's engineer, SGS is obligated to provide the required and skilled personnel licensed for the scope of activities according to Polish law.
SGS owner's engineer services for the wind sector ensure that every contractor meets all required and agreed conditions in terms of technical parameters, quality of equipment and works, scheduled time and contract price. These SGS services provide wind farm owners with solutions which allow for efficient and complete monitoring of project progress.
SGS is pleased to be a part of this distinguished project providing clean energy to the people of Poland.
For further information, please contact:
SGS Industrial Services
Head of wind section / Associate Director of INVIDV branch
Bema 83, Warsaw
SGS is the world's leading inspection, verification, testing and certification company. SGS is recognized as the global benchmark for quality and integrity. With more than 75,000 employees, SGS operates a network of over 1,500 offices and laboratories around the world.
Get an efficient power supply system based on lithium technology and receive 12V/24V and 230V/50Hz simultaneously.
The Clayton Power lithium battery system can be charged from the mains via a G3 Combi - inverter/charger, an alternator while driving or from other power sources.
Our lithium ion batteries can be connected in parallel to achieve scalable power capacity and output. Connect more inverters or inverter/chargers to get a greater 230V output and even faster charging times.
The G3 Combi - Inverter/Charger series, is a combined 230V power supply and intelligent multi charger in one compact unit.
Lithium Ion Batteries
Built-in Battery Management System. 12V and 24V - 100Ah. Scalable up to 2000Ah.
+ Powerful + Low weight + Long lifetime + Fast charging
Clayton Power | Lithium Battery Systems for Mobile, Off-Grid and Storage Solutions