TV Rheinland: Innotech Solar's new low profile module frames are tested up to 8,000 Pascal

New frame improves performance and saves transport and storage costs

Munich/Germany, November 27, 2013 – Scandinavian-German solar module manufacturer, Innotech Solar (ITS), has reduced the profile of its modules frames from 43 millimeters to 35 millimeters. The lower profile frame of its photovoltaic modules which is compatible with industry standard clamps for fixing modules to substructure also allows more modules to fit on a pallet than before, enabling customers to save on storage and transport costs. The new frames' exceptional strength was proven in an 8,000 Pa (Pascal) load capacity test by renowned testing institute TV Rheinland (German Technical Inspection Association). Considering that the International Electrotechnical Commission (IEC) only demands a mechanical load bearing capacity of 5,400 Pa, this load capacity test exceeds standard requirements by far.

Press photos are available to download at:

"The load capacity test shows that our new frames are able to withstand at least 1,345 kilograms, which is equivalent to the weight of a car," explains Dr. Thomas Hillig, Vice President Module Sales & Marketing at Innotech Solar. "Therefore they are also particularly suitable for installation in areas of high snow fall or strong winds."

Innotech Solar optimizes solar cells from leading manufacturers which are used to produce their own modules. Cell optimization is performed in the German city of Halle an der Saale, while module production takes place in Glava, Sweden, at one of Europe's most modern manufacturing plants. This innovative manufacturing process makes ITS modules particularly environmentally friendly. Their carbon footprint is around 50 percent below that of conventional European modules.

After processing, the cells are thoroughly checked using additional thermal imaging to make sure that they are free from hot spots, which could damage the solar modules and result in significant yield losses. A multitude of tests by independent experts, such as the Photovoltaik-Institut Berlin or PV Lab, demonstrate the high efficiency, longevity and positive environmental impact of Innotech Solar modules.

Click on the link to see the certificate showing ITS module frames' high load bearing capacity:

About Innotech Solar
The Scandinavian-German company manufactures solar modules in Europe and sells them worldwide. Innotech Solar specializes in the production of particularly environmentally friendly modules with optimized solar cells and uses innovative processes developed by in-house research teams to do so.

Innotech Solar optimizes solar cells in Halle an der Saale, Germany, and manufactures its modules in a former REC solar factory in Glava, Sweden, which thanks to its fully automated production lines is one of Europe's most modern manufacturing plants. The production process is powered at both sites using 100 percent renewable energy.

Featured Product

Solar FlexRack - The FlexRack Series G3L

Solar FlexRack - The FlexRack Series G3L

The FlexRack Series G3L is the latest fixed tilt racking system from Solar FlexRack. This system offers the speed and ease of installation unlike any on the market today. The system ships in a pre-assembled folded position and is simply unfolded and set into place on the jobsite. The speed of installation for the FlexRack Series G3L has been verified by a third party industrial time study institute. The FlexRack Series G3L offers unique module mounting options which allow the installer to use clips, direct bolt, or a combination of both for a flexible module mounting solution. The FlexRack Series G3L also offers integrated bonding and wire management options. Stop by our booth to see a demo of the FlexRack Series G3L and learn about our full product line of racking innovations.