Natural Power manage the energy produced to power 1 in 50 UK homes, on behalf of its Clients

Wind generation hit record breaking highs in December as wind power supplied enough electricity for the National Grid to power more than 5.7 million homes.

During a record breaking month (December 2013) for wind energy generation, international renewable energy consultancy Natural Power managed the energy produced to power 1 in 50 homes in the UK - 2% of the UK's total electricity generation.


Wind generation hit record breaking highs in December as wind power supplied enough electricity for the National Grid to power more than 5.7 million[1] homes (a total of 2,841,080 MWh of electricity) – supplying 10% of Britain's total electricity demand.

Natural Power currently provide Asset Management services to over 2GW of the 10.5 GW[2] onshore and offshore installed capacity – 20% of the UK's total wind capacity. Therefore, throughout the month of December, Natural Power was responsible for the management of 2% of electricity provision in the UK, on behalf of its Clients.

Natural Power's Asset Management team currently manage 118 wind farms globally, including 13 in Ireland and 2 in North America, representing some 1197 turbines.

Commenting on this statement, Natural Power's Director of Asset Management, Andy Howie said: "Natural Power are at the forefront of providing Asset Management services internationally. Managing 2% of the UK's total electricity demand in such a triumphant month for the renewable energy sector is testament to our vision of being the No. 1 Asset Management provider globally."

For more information sayhello@naturalpower.com or visit www.naturalpower.com

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.