ATI's DuraRack™ fixed-tilt system picks up steam heading into 2014

Array Technologies' Best Kept Secret – Until Now

2013 was a landmark year for Array Technologies' DuraRack™ fixed-tilt racking solution. With more than 53 MW shipped and installed at five sites in just under six months, ATI's best kept secret is breaking major ground. Three utility-scale projects in Indiana are now home to 39 MW of the DuraRack fixed-tilt system, and two distributed generation sites in North Carolina installed another 14 MW combined.


"As the leading solar ground-mounted systems company we are proud to offer our customers a fixed racking system that echoes the ease and simplicity fundamental to all of our tracking products," explains ATI Founder and CEO, Ron Corio. "By providing an industry-leading fixed-tilt rack we are able to partner with our customers on a wider variety of solar sites."

The DuraRack fixed-tilt racking system employs many of the same patented features that make the DuraTrack™ HZ the most widely deployed single-axis tracking system in the world. Incorporating the universal module mounting clamps with integrated grounding, as well as customizable tilt angles between 10° and 40°, this racking system has the fastest install rates and lowest number of posts per module of any fixed-tilt system in existence today. In addition, the DuraRack can rack modules in portrait or landscape configurations to maximize ground coverage ratio (GCR) and meet any and all energy generation requirements at sites around the world.



About Array Technologies:

Array Technologies is the worldwide market leader in tracking solutions for utility, commercial and residential solar electric systems, with nearly 2 gigawatts shipped and installed across the globe. Array's innovation and leadership in ground mount fixed-rack and solar tracker design has established the industry standard for cost-effective, robust, reliable and easy to install PV solutions with over two decades of field experience. Headquartered in Albuquerque, NM, Array Technologies' ground mount solutions are engineered and manufactured in the USA. For more information about Array Tech

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.