First Twin Axe delivery for Njord Offshore

Njord Offshore from Essex, UK, have taken delivery of their first 26m Twin Axe built by Damen Shipyards Group. The vessel was ordered early January 2014 and the delivery took place on 27th February. During this 7 week period the vessel was modified from a basic, standard vessel to suit the specific Njord Offshore requirements.

Njord Offshore was established in 2011. The company focuses on the Offshore Wind industry and operates vessels ranging from 21-26m. In 2014, the Njord fleet shows 9 vessels with further fleet expansion in 2015.


The most specific modifications and additions are:
Different railing lay-out on the fore deck to create a larger loading area.

*Installation of a second generator set.
*Larger windows throughout the seating area to create a more open atmosphere.
*Installation of a fuel transfer system.
*Licensed to carry 12 plus 4 crew.
*CCTV covering all areas.
*25 t/m knuckle boom crane.
*High pressure washer.
*SeaSight central push fender.
*Bunks for 6 crew.
*2 galleys and pantries.
*Full Njord colour scheme for hull and superstructure.
*Semi enclosed fore deck grating to minimize spray.

Fast delivery

Damen Twin Axe vessels can be delivered from stock as a basic vessel and can be modified to suit particular requirements in a matter of weeks. Both the Twin Axe 2610 and the new, 20m, Twin Axe 2008 are stock vessels. The vessels have been and can be delivered to UK, German, Danish, Swedish or any other flag state requirements.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.