First Solar Completes 1.3MW(DC) Solar PV Power Plant at Kitakyushu-shi in Japan

The plant will generate approximately 1,400 MWh of clean and safe solar electricity per year

TOKYO--First Solar, Inc. (Nasdaq: FSLR) today announced the completion of the 1.3MW(DC) solar photovoltaic (PV) power plant at Kitakyushu-shi. Powered by First Solar FS Series 3 Black PV modules, the plant will generate approximately 1,400 MWh of clean and safe solar electricity per year. Power from the project will be purchased by Kyushu Electric Power Company.

"Japan has ambitious solar power development goals to help mitigate the dependency on nuclear energy," said Joe Kishkill, First Solar's Chief Commercial Officer. "The completion of the Kitakyushu-shi project supports that commitment along with providing electricity users with a fuel alternative that is safe, can be rapidly deployed, and has the smallest carbon footprint."

The project had a workforce of approximately 65 construction jobs at its peak, building local capability to construct similar clean and safe solar power projects in the future.

First Solar holds 100 percent equity in the project. Obayashi Corporation and Yaskawa Electric Corporation constructed the project. Nippon Sheet Glass supplied the advanced technology glass used in the PV modules.

About First Solar, Inc.

First Solar is a leading global provider of comprehensive photovoltaic (PV) solar systems which use its advanced module and system technology. The company's integrated power plant solutions deliver an economically attractive alternative to fossil-fuel electricity generation today. From raw material sourcing through end-of-life module recycling, First Solar's renewable energy systems protect and enhance the environment. For more information about First Solar, please visit

Featured Product



You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.