New Energy's See-Through SolarWindow™ Estimated to Generate Ten-Fold Greater Electrical Energy & Environmental Benefits Over Today's Rooftop Solar

New Energy Technologies, Inc. (OTCQB: NENE), developer of see-through SolarWindow™ coatings capable of generating electricity on glass and flexible plastics, today released first-ever power modeling estimates of its SolarWindow™ prototype modules.

COLUMBIA, Md.--June 3, 2014 --New Energy Technologies, Inc. (OTCQB: NENE), developer of see-through SolarWindow™ coatings capable of generating electricity on glass and flexible plastics, today released first-ever power modeling estimates of its SolarWindow™ prototype modules. Engineers estimate that SolarWindow™ modules could conservatively produce at least ten times the electrical energy of conventional rooftop photovoltaic (PV) systems, and in some instances, exceed power performance by as much as 50-fold. SolarWindow™ modules could also eliminate the equivalent carbon dioxide (CO2) emissions produced by vehicles driving more than 2 million miles per year.

Recently, New Energy's largest, high-performance SolarWindow™ module set a new "certified" record for generating electricity while remaining see-through; SolarWindow™ high-performance prototype produced over 50 percent greater power than prior attempts publicized by others of comparable organic photovoltaic (OPV) prototype device architecture, size and design.

Using the independently tested and certified power production data for its SolarWindow™ modules from the U.S. Department of Energy's National Renewable Energy Laboratory (NREL), Company engineers have since developed a model for estimating the amount of electrical energy and environmental benefits SolarWindow™ prototype modules may provide.

In every instance where New Energy's high-performance prototype SolarWindow™ modules have been modeled for performance against today's typical rooftop solar PV module systems, the modeling estimates show significantly greater generation of electrical energy and multiple-fold environmental benefits.

By way of illustration, the Company model estimates show that when installed on all four sides of a 50-story building in:

* Phoenix, Ariz. – SolarWindow™ modules could generate enough electricity to power 130 homes each year. Today's rooftop systems could only produce enough for 3 to 11 homes per year.

* Amarillo, Texas – SolarWindow™ modules could provide the equivalent of avoiding the CO2 emissions produced by vehicles driving over 2.2 million miles each year. Today's rooftop systems could only avoid the equivalent CO2 emissions produced from 49,000 to 180,000 miles of vehicle miles per year.

* Miami, Floa. - SolarWindow™ modules could generate over 1.3 million kWh (kilowatt hours) of energy. Today's rooftop systems could only generate from 28,000 to 102,000 kWh.

* Denver, Colo. – SolarWindow™ modules could provide the equivalent reductions in CO2 emissions produced by as much as 770 acres of forest sequestering CO2. Today's rooftop systems could only provide the equivalent CO2 reductions produced by 20 to 70 acres of forest sequestering CO2.

(New Energy's summary estimates are rounded. View actual model estimates at:

"High power output and meaningful environmental benefits are among the most important drivers for our potential commercial customers, strategic partners, and end consumers," explained Mr. John Conklin, President and CEO of New Energy Technologies, Inc. "We now have a model that estimates SolarWindowT module performance in these key areas, and compares these estimates to today's conventional rooftop solar PV module systems."

"Importantly, we've long believed in the electrical power production and environmental benefits of applying our see-through SolarWindowT coatings to the many acres of glass windows on all four sides of commercial tall towers and skyscrapers, rather than relying on limited rooftop space available for today's conventional solar PV rack-mounted systems. Our decision to pursue vast glass surfaces on buildings to create environmentally friendly energy producing power plants shows its benefits in our latest modeled estimates."

Today's modeled estimates were developed exclusively by New Energy Technologies' engineers and researchers. The Company's internal teams modeled their calculations based on results of independent testing and certification of its record-setting SolarWindowT high-performance modules by the NREL Device Performance Measurement Laboratory. The Device Performance group is one of only two laboratories in the world to hold an International Organization for Standardization (ISO) 17025 accreditation for primary reference cell and secondary module calibration, in addition to accreditation for secondary reference cell calibration under American Society for Testing Materials (ASTM) and International Electrotechnical Commission (IEC) standards.

SolarWindowT is currently under development for eventual commercial deployment in the estimated 80 million detached homes in America and more than five million commercial buildings. The technology is the subject of 42 patent filings, and researchers are on track to advance SolarWindowT towards full-scale commercial manufacturability - a near-term goal.

To view photographs of New Energy's latest high performance SolarWindowT modules, click here.

New Energy Technologies' Proprietary Power Production Model (Power Model) uses Photovoltaic (PV) modeling calculations that are consistent with renewable energy practitioner standards for assessing, evaluating and estimating renewable energy for a PV project. The Power Model estimator takes into consideration building geographic location, solar radiation for flat-plate collectors (SolarWindowT irradiance is derated to account for 3600 building orientation and vertical installation), climate zone energy use and generalized skyscraper building characteristics when estimating PV power and energy production, and carbon dioxide (CO2) equivalents. Actual power, energy production and CO2 equivalents modeled may vary based upon building-to-building situational characteristics and varying installation methodologies.

About New Energy Technologies, Inc.
New Energy Technologies, Inc., together with its wholly owned subsidiaries, is a developer of next generation alternative and renewable energy technologies. Among the Company's technologies under development is:

* SolarWindow™ technologies, which generates electricity on see-through glass and flexible plastics with colored tints popular to skyscraper glass. Unlike conventional systems, SolarWindow™ can be applied to all four sides of tall towers, generating electricity using natural and artificial light conditions and even shaded areas. SolarWindow™ uses organic materials, which are dissolved into liquid, ideal for low-cost high-output manufacturing. New Energy's SolarWindow™ is the subject of 42 patent applications.

Through established relationships with universities, research institutions, and commercial partners, we strive to identify technologies and business opportunities on the leading edge of renewable energy innovation. Unique to our business model is the use of established research infrastructure owned by the various institutions we deal with, saving us significant capital which would otherwise be required for such costs as land and building acquisition, equipment and capital equipment purchases, and other start-up expenses. As a result, we are able to benefit from leading edge research while employing significantly less capital than conventional organizations.

For additional information, please visit:

Featured Product

GreenFasten™ solar panel roof mount hardware, watertight, USA made

GreenFasten™ solar panel roof mount hardware, watertight, USA made

The GreenFasten™ - GF1 system utilizes the patented watertight technology EcoFasten Solar® is known for. The flashing is fit with our EPDM rubber bushing and when used with a compatible EcoFasten Solar compression bracket (milled with countersink), a watertight seal is created, which protects the integrity of the roof. Requiring just a single fastener (lag bolt or self-drilling), GreenFasten provides the fastest install in the industry and will not void roofing manufacturer's warranties. Backed by IAPMO certification, GreenFasten delivers a mounting solution for all new or existing (retrofit) composition shingle roofs, and is the most cost-effective solution available. Like all of the solar roof mount solutions in our line of products, GreenFasten is made in the USA using recycled materials.