Mortenson Construction Completes Spinning Spur II Wind Project

Mortenson Construction's Renewable Energy Groups has completed construction on the Spinning Spur II Wind Project located in Oldham County, Texas.

Minneapolis, MN July 17, 2014


Mortenson Construction's Renewable Energy Groups has completed construction on the Spinning Spur II Wind Project located in Oldham County, Texas.

Spinning Spur II represents the 24th wind project that Mortenson has built for long-time customer, EDF Renewable Energy, and the 21st wind project that Mortenson has built in Texas to date.

Mortenson's overall scope of work on the 167- megawatt project included engineering, procurement and construction of all access roads, foundations, wind turbine erection, collection system, operations and maintenance building and the installation of MET towers.

Approximately 200 jobs were created throughout the course of construction which began in June 2013.

"We're very pleased to have partnered with EDF Renewable Energy on our 24th successful project together and to have been part of building one of the first projects to connect to the CREZ," (Competitive Renewable Energy Zone) said Tim Maag, vice president and general manager of Mortenson Construction's Wind Energy group.

The CREZ project was initiated by the Texas legislature in 2005 to help create a competitive market for wind energy in Texas, primarily by bringing power to more densely populated areas where transmission lines did not previously exist.

Since entering the renewable energy market in 1995, Mortenson Construction has become a leading builder of wind power facilities in North America with 137 projects completed or under construction.

About Mortenson Construction
Founded in 1954, Mortenson Construction is a U.S.-based, family-owned construction company. Ranked as the 25th largest contractor in America, according to Engineering News-Record, and the 13th largest power contractor, Mortenson provides a complete range of services, including planning, program management, preconstruction, general contracting, construction management, design-build, and turn-key development. Mortenson has offices in Chicago, Denver, Milwaukee, Minneapolis, Phoenix, Seattle and Canada.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.