Morgan Advanced Materials announces FireMaster® FireBarrier™ high performance fire protection

Morgan Advanced Materials announces the availability of FireMaster® FireBarrier™ 135 sprayed refractory cement, offering superior fire protection and simple, cost effective installation.

Morgan Advanced Materials announces the availability of FireMaster® FireBarrier™ 135 sprayed refractory cement, offering superior fire protection and simple, cost effective installation. FireMaster® FireBarrier™ 135 is ideal for concrete tunnel lining fire protection and the fire protection of ventilation shafts, escape tunnels and refuges as well as critical systems such as water mains and communication cables.


FireMaster® FireBarrier™ 135 has been specially developed for the high temperatures that may occur in tunnel fires. Unlike most other products used for tunnel fire protection, it can withstand repeated and prolonged exposure to high-temperatures. It can be installed onto concrete or metal substrates using standard spray equipment and featuring very low spraying wastage during installation, its single layer application makes it fast and easy to install. It is adhesive to most construction materials and can be installed quickly, helping to reduce labor costs while maintaining the final product's quality and proven reliability.

FireMaster® FireBarrier™ 135 has extremely high adhesion strength – typically eight times its weight, allowing fixings to be attached directly to it. It can be trowelled flat to provide a high-quality surface finish that can be used as the final tunnel lining surface (with optional painting), avoiding the need for expensive secondary cladding. The material can also be cast into sheet form and installed as a dry board or shape for applications where spraying is not convenient.

Comprehensive and extensive testing of FireMaster® FireBarrier™ 135 per the RWS fire curve and required by NFPA 502 has proven that the material resists environmental conditions found in tunnels, making it ideal for tunnel fire protection. FireMaster® FireBarrier™ 135 is resistant to water jet sprays used to clean tunnel lining, and will not spall when subjected to water hose sprays at high temperature, increasing fire-fighting safety.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.