GameChange Pour-in-Place™ Ballasted Ground System Wins 4 MW order in MA

Quality, fast install time and value were the primary factors in the selection of GameChange's system.

NEW YORK – September 16th, 2014 – GameChange Racking today announced the Pour-in-Place™ Ballasted Ground System won a 4 MW order in Massachusetts for immediate shipment. Quality, fast install time and value were the primary factors in the selection of GameChange's system.


GameChange Pour-in-Place™ is an industry's leader for ballasted ground systems both for landfills and for rocky sites where screws and pile installations are often too expensive.

GC Pour-in-Place™ Ballasted Ground System features:

*Priced starting $.169/w for racking and forms, $.189/w complete system including ballast
*$0.025/w typical install labor cost for ballast and rack

*Self-leveling technology: 68% faster install than precast
*Large ballast footprint reduces landfill cap loading
*Panels rapidly mount using T-bolts and self-grounding ETL/UL 467 module clamps
*Integrated wire management tray on robust aluminum rails

*Passed rigorous electrical and mechanical testing by ETL to UL 2703
*Bankability technical due diligence assessment by industry leader Black & Veatch
*Wind tunnel tested by industry leader CPP

Andrew Worden, CEO at GameChange Racking, was quoted:

"The GameChange Racking patent pending protected Pour-in-Place™ Ballasted Ground System has moved to leadership position in the solar PV industry due to its superior quality, fast installation time and unbeatable value pricing.

The GameChange Pour-in-Place™ Ballasted Ground System due to its deep value pricing has not only opened up opportunities to develop many more landfill and brownfield sites that were previously economically feasible, but also has opened a market that previously was not possible for ballasted ground solutions over rocky soil where penetrating pile driven or screw systems are not a cost effective option. Developers and EPCs value knowing what their costs will be without worrying about cost or time delays related to subsurface conditions."

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.