New Report Shows America's Schools Saving Money by Going Solar

The Solar Foundation's report is the first nationwide assessment of how solar energy helps to power schools in communities across America.

WASHINGTON, DC – In a report card deserving of the honor roll, a comprehensive, first-of-its-kind new study released today says America's K-12 schools have shown explosive growth in their use of solar energy over the last decade, soaring from 303 kilowatts (kW) of installed capacity to 457,000 kW, while reducing carbon emissions by 442,799 metric tons annually – the equivalent of saving 50 million gallons of gasoline a year or taking nearly 100,000 cars off U.S. highways.


Brighter Future: A Study on Solar in U.S. Schools was prepared by The Solar Foundation (TSF) – with data and analysis support from the Solar Energy Industries Association (SEIA) – and funded through a grant provided by the U.S. Department of Energy's SunShot program.

The Solar Foundation's report is the first nationwide assessment of how solar energy helps to power schools in communities across America. Most importantly, the report shows that thousands of schools are already cutting their utility bills by choosing solar, using the savings to pay for teacher salaries and textbooks. What's more, the report estimates that more than 70,000 additional schools would benefit by doing the same.

"Solar enables schools to save money, enrich learning and keep teachers in the classroom – all while providing local jobs and generating emissions-free electricity," said Andrea Luecke, President and Executive Director of The Solar Foundation. "With five times as many solar schools today than in 2008, it is clear that the solar schools movement is gaining momentum and providing kids with the greatest benefits," Luecke added.

Here are the report's key findings:

*There are 3,752 K-12 schools in the United States with solar installations, meaning nearly 2.7 million students attend schools with solar energy systems.

*The 3,727 PV systems have a combined capacity of 490 megawatts (MW), and generate roughly 642,000 megawatt-hours (MWh) of electricity each year, which represents a combined $77.8 million per year in utility bills ‒ an average of almost $21,000 per year per school.

*Despite this promising progress, solar potential remains largely untapped. Of the 125,000 schools in the country, between 40,000 and 72,000 can "go solar" cost-effectively.

"An analysis performed for this report found that 450 individual school districts could each save more than $1,000,000 over 30 years by installing a solar PV system," said SEIA President and CEO Rhone Resch. "That's a lot of money. In a time of tight budgets and rising costs, solar can be the difference between hiring new teachers – or laying them off. Just as importantly, solar is also helping to fight pollution, providing hope for our children, as well as for future generations of children."

The new report also found:

*More than 3,000 of the 3,752 systems were installed in the last six years. Between 2008 and 2012, solar installations on U.S. schools experienced a compound annual growth rate of 110 percent.

*Nearly half of the systems currently installed are larger than 50 kilowatts (kW) and 55 schools have systems that are 1 megawatt (MW) or larger. About a quarter of the PV systems at schools are smaller than 5 kW.

*As schools system sizes increase, so too does the incidence of third-party ownership.

*Excluding small demonstration systems, the median system size of K-12 school PV systems was found to be 89 kW (approximately equal to 18 average residential solar PV systems).

As is the case with the solar industry at large, the report found that more schools are going solar as installation costs decrease. According to the SEIA/GTM Research U.S. Solar Market Insight report, by the second quarter of this year, national blended average system prices had dropped 53 percent since 2010.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.