Miasole Introduces the Roofing Industry's First Flexible Large Format Solar Module for TPO Roofs

Miasole, a company of Hanergy introduces their new FLEX 01-W PV (210-watts) module for TPO roof systems. The Miasole FLEX W module is the roofing industry's first flexible large format solar module for low slope commercial roofing. The FLEX module's high performance self-adhesive provides a roofer friendly simple peel-n-stick installation system with the industry's first 25-year adhesion guarantee.


Miasole, a company of Hanergy introduces their new FLEX 01-W PV (210-watts) module for TPO roof systems. The Miasole FLEX W module is the roofing industry's first flexible large format solar module for low slope commercial roofing. The FLEX module's high performance self-adhesive provides a roofer friendly simple peel-n-stick installation system with the industry's first 25-year adhesion guarantee.

The Miasole FLEX module bonded to the TPO roof systems eliminates the need for racking, concrete ballast or roof penetrations. The FLEX low profile PV module has the same wind uplift rating of the roof system design, making FLEX the best solar choice for high wind zones. Weighting less than 0.7 lb/sq ft, FLEX is idea for roofs with low load capacity and buildings in high seismic areas.

The Miasole FLEX modules simplify project logistics, reduce labor costs, and installation. For more information, contact Miasole at sales@miasole.com today.

The Miasole solar TPO installation video http://www.youtube.com/watch?v=I6u7R3F5fZc

About Miasole
MiaSolé is a producer of thin-film Copper Indium Gallium Selenide (CIGS) solar cells and panels. Founded in 2004, MiaSolé has evolved from a Silicon Valley start-up to the world leader in thin film solar panel efficiency. In its Sunnyvale, CA facility, MiaSolé has demonstrated 15.5% module efficiency in production. Miasole became part of the Hanergy family of renewable energy technology companies in 2012.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.