Natcore Produces First Germanium Quantum Dot-Based Solar Cell

Potential Precursor to Flexible, High Efficiency Tandem Solar Cell

RED BANK, N.J., Feb. 17, 2015 -- Scientists working with Natcore Technology Inc. (TSX-V: NXT; NTCXF.PK) in the Rice University laboratories of Prof. Andrew Barron, a Natcore co-founder, have successfully formed a heterojunction solar cell using germanium quantum dots on an ordinary n-type silicon wafer.


Individual germanium quantum dots were coated with silicon dioxide (silica), doped to make them p-type, and then deposited, using Natcore's liquid phase deposition (LPD) process, on a commercial-grade silicon wafer. The LPD process was developed at Rice and is licensed exclusively to Natcore.

"Very simply put, we used our proprietary process to 'dope' silica-coated germanium quantum dots and arrange them in a silica film atop a commercial silicon wafer. We then put contacts on the coated wafer to create a cell, and exposed it to light. We obtained a net power out of the device," says Dr. Dennis Flood, Natcore's Chief Technology Officer and also a company co-founder.

Quantum-dot solar cells have the potential to be transformational for terrestrial solar energy, with efficiencies far above anything available commercially today.

The advantage lies in the fact that by carefully controlling the size of the quantum dots, the cell can be "tuned" to capture energy from a specific spectrum of light. The portion of the spectrum not captured passes to the next layer below, where it can then be captured by either a specifically tuned lower quantum-dot cell or even an ordinary silicon cell.

Thus, using "multijunction" or "tandem" cells with two or more layers of quantum-dot cells, much more of the solar spectrum can be converted to energy. In contrast, current single junction solar cells are most efficient for only a limited portion of the solar spectrum.

"To our knowledge, no one else has been able to successfully dope and arrange silicon or germanium quantum dots into layers using a process such as Natcore's, which appears to be ideal for mass production," notes Flood.

Tandem solar cells are a proven technology in space applications. The major issue preventing their broad use in earth-based applications has been the need to use exotic semiconducting materials for the upper layers.

The cell created in Dr. Barron's laboratory for Natcore uses relatively abundant and inexpensive germanium, with the coated quantum dot having been characterized as a "p-type" material.

This heterojunction cell, with p-type quantum dots on an n-type silicon wafer, is an important step toward a cell in which quantum dots are used to form both the p-type and n-type materials. Once this next step is achieved, it will open the door to potential ultra-high-efficiency, multi-junction solar cells.

"This is a truly exciting time for Natcore and our shareholders," says Chuck Provini, Natcore's president and CEO. "We are one step away n-type quantum dots from our ultimate goal in our quantum dot solar cell program.

About Natcore Technology
Natcore Technology is focused on using its proprietary nanotechnology discoveries to enable a variety of compelling applications in the solar industry. Specifically, the company is advancing applications in laser processing, black silicon and quantum-dot solar cells to significantly lower the costs and improve the power output of solar cells. With 64 patents (21 granted and 43 pending) Natcore is on the leading edge of solar research. www.natcoresolar.com

Featured Product

Joyce Dayton Corp - Solar Tracking Drive Solutions

Joyce Dayton Corp - Solar Tracking Drive Solutions

Joyce Solar Actuators are designed to precisely position smaller solar tracking equipment. Their robust and efficient DC motor (24V or 36V) keeps power consumption to a minimum. Travel speeds remain nearly constant regardless of the load. Ideal for rugged environments common to the solar industry, these cost-effective SA actuators have an IP65 protection rating. Self-locking features in the mechanism ensure that the solar actuator will hold position throughout the daily tracking cycle. Specifications: • Double clevis mounting for easy installation • Clutch for overload protection • Adjustable limit switches for flexible travel settings • Reed sensor digital feedback for accurate positioning • Duty cycle is 25% (4 min. running, 12 min. rest) • Lubricated for life