Binsfeld Engineering introduces the TorqueTrak TPM2 featuring digital output signal for the Alternative Energy Industry

Binsfeld Engineering Inc. has announced the release of the new TorqueTrak TPM2 torque and power monitoring system for applications such as wind turbine power generation, hydro-power industry, pumps and compressors.

Binsfeld Engineering Inc. has announced the release of the new TorqueTrak TPM2 torque and power monitoring system for applications such as wind turbine power generation, hydro-power industry, oil & gas, pumps and compressors, marine and automotive. The TPM2 model features a digital RS422 full duplex, serial interface with user selectable sample rates ranging from 10 to 4800 samples/second. Signal resolution is 15 bits for eight input ranges from 0 to 32mV/V down to 0 to 0.25mV/V.


TPM2 setup and configuration is easy and convenient with BEI- supplied software. System changes can safely be made away from the shaft using the RS422 interface.

Like all Binsfeld Engineering torque telemetry systems manufactured in Maple City, MI. USA, the TorqueTrak TPM2 uses proven and reliable strain gage technology and does not require shaft modification or machine disassembly. Rugged and precise, the TorqueTrak TPM2 is ideal for continuous long term measurement and available for shaft diameters from 0.75"(19mm) to 40 inches (1016mm).

Since 1971, Binsfeld Engineering has focused on transmitting sensor measurements from the rotating world, both in the U.S. and around the world. The TorqueTrak TPM2 continues this focus with user-friendly technology that is both precise and reliable.

Good. Better. Binsfeld.

For more information: info@binsfeld.com

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.