PowerCell Sweden AB receives its first order of a 100 kW PowerCell S3 prototype fuel cell stack from a European company

Nordic leading fuel cell company PowerCell Sweden AB (publ) has received a first order for a prototype of a 100 kW PowerCell S3 fuel cell stack from a European company that will use it in an automotive application.

[Gothenburg, Sweden, January 18, 2015.] Nordic leading fuel cell company PowerCell Sweden AB (publ) has received a first order for a prototype of a 100 kW PowerCell S3 fuel cell stack from a European company that will use it in an automotive application.


The PowerCell S3 prototype is expected to be delivered during the second quarter of this year. PowerCell S3 fuel cell stack is based on the platform developed by the PowerCell in the Autostack Core project together with its project partners.

"We are delighted that the customer has chosen our fuel cell stack prototype for the project. This confirms that the results of the Autostack Core project are very promising. That the customer has chosen our stack also shows that the demand for our clean energy solutions increases, even if the order has a limited impact on this year's result", says Mr Boden, Director Marketing & Sales at PowerCell Sweden AB.

About PowerCell S3 fuel cell stack
The PowerCell S3 fuel cell stack platform will complement the first and second fuel cell stack platforms; the PowerCell S1 (1 5 kW) and PowerCell S2 (6 25 kW) as it covers a larger power range from 20 kW up to 100 kW, except that this platform is designed to only using pure hydrogen as the fuel. The PowerCell S3 fuel cell stack uses proton exchange membrane (PEM) technology and is the choice for automotive applications. PEM is the most common technology used today, owing to its reliable and dynamic characteristics that allows for full power output within seconds.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.