EXERGY's ORC technology proves higher efficiency and profitability in clean power generation

Umurlu I 12 MW geothermal plant with a first Made in Turkey turbine now running with performances between 8 up to 12 % higher than guaranteed figures

Olgiate Olona, 07 June 2016 - EXERGY, the Italian technology leader in the design, engineering and manufacturing of Organic Rankine Cycle power plants with the pioneering Radial Outflow Turbine technology, announces Umurlu I geothermal plant, commissioned in the late 2015 in Turkey for the client KARKEY Karadeniz Elektrik Uretim is successfully in operation producing clean power with higher efficiency than the expected results.


The performance test conducted with several measurements in the past week, validated by the third party company Power Engineers, confirmed the plant is running with over performances between 8 and 12% due to the Radial Outflow Turbine, and is therefore producing up to 1.5 MWe more than guaranteed value to the client.

This power increase over the guaranteed figure, combined with the increased FIT for made in Turkey production of the turbine and auxiliary equipment provides the customer with revenues approximately 25% greater than initially anticipated.

The Umurlu I plant represents a double achievement for EXERGY. It proves the positive performance and higher efficiency of the Radial Outflow Turbine technology on large size binary plant configuration. Also it confirms the quality and capability of the Turkish Exergy factory in Izmir to satisfy best the needs of the local market, supplying the first certified Made in Turkey turbine in the market.

Located in the geothermal area of Umurlu, near Denizli Umurlu I is the first of two 12 MW binary plants in EXERGYs contract with Karkey. The second 12 MW plant will be operational in the second half of 2016 delivering the client a total power output of 24 MW. The solution provided by EXERGY utilizes an ORC module equipped with two Radial Outflow Turbines connected to a common generator and an air cooled system sized to maximize the efficiency of the plant.

Claudio Spadacini, EXERGYs CEO and founder commented on this brilliant result: "Karkey project has been another challenging opportunity to test EXERGYs capability in two key areas, using the ROT on a larger scale plant, and fulfilling the difficult criteria required to gain a higher Feed in Tariff by localling manufacturing this revolutionary technology. The success on both fronts helps confirming the ROT superior efficiency and cement Exergys position as a leader in the Turkish market".

Featured Product

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoilTM Cast Resin Medium Voltage Transformer

HPS EnduraCoil is a high-performance cast resin transformer designed for many demanding and diverse applications while minimizing both installation and maintenance costs. Coils are formed with mineral-filled epoxy, reinforced with fiberglass and cast to provide complete void-free resin impregnation throughout the entire insulation system. HPS EnduraCoil complies with the new NRCan 2019 and DOE 2016 efficiency regulations and is approved by both UL and CSA standards. It is also seismic qualified per IBC 2012/ASCE 7-10/CBC 2013. Cast resin transformers are self-extinguishing in the unlikely event of fire, environmentally friendly and offer greater resistance to short circuits. HPS also offers wide range of accessories for transformer protection and monitoring requirements.