Turbine tip extension offers energy output boost

Natural Power recently provided planning support and conducted structural assessments as part of a retro-fit blade tip extension pilot project for Siemens Gamesa.

Natural Power recently provided planning support and conducted structural assessments as part of a retro-fit blade tip extension pilot project for Siemens Gamesas fleet of 2.3MW onshore wind turbines at Fred.Olsen Renewables Crystal Rig II site in the Scottish Borders. It is expected that the tip extensions of 2.55m will achieve an annual energy production boost of up to 10%.


Shane Bermingham, Engineering Design Lead at Natural Power, said: "As we move to a subsidy free market, any increases asset owners can see in production is a very attractive proposition. It is great to see the evolution of wind turbine technology and the optimisation of their performance, and we are delighted to have been involved with the blade tip extension project with Fred.Olsen Renewables and Siemens Gamesa at Crystal Rig."

The prototype tested at Fred.Olsen Renewables 138MW Crystal Rig II wind farm in Scotland secured a 7.85% bump in performance. Generally, production increases of between 3% and 10% are expected depending on the power curve technology installed on the particular machine along with air density and other factors.

One of the key aspects of changing the rotor area and loading regime on the turbine is assessing the capacity foundation. The foundations should be assessed to ensure the original design is not fully utilised under the existing loading regime and give consideration to what fatigue the foundation has been exposed to date. This would allow an understanding of its past performance and its ability to deal with future changes to loading.

The proposed tip extension is made of two shells of fibre-glass reinforced epoxy that are glued together and filled with epoxy foam before being fitted to the blade. The product will be available later this year in the UK, Ireland and US.

Are you interested in understanding your operational wind turbine foundations?
We have the in-house expertise to undertake structural assessments to examine your foundations and potential options available for optimising your assets. To find out more about this service please contact Shane Bermingham shaneb@naturalpower.com

Featured Product

S-5!® PVKIT™ 2.0 Solar Rooftop Solutions

S-5!® PVKIT™ 2.0 Solar Rooftop Solutions

The concept of combining PV arrays with standing seam metal roofing is growing-for good reasons. Metal roofs have a life expectancy of more than 40 years. Shouldn't the mounting system last as long? With S-5! zero-penetration attachment technology and PVKIT 2.0, the solarized metal roof is the most sustainable system available -and without compromising roof warranties! PVKIT 2.0 is the also the best solution for attaching PV modules directly to any exposed fastener metal roof.