Flexible solar cell woven into fabric

Wearable electronics are quickly becoming the fashion. And there could soon be a way to power those electronics indefinitely, now that scientists in China have developed a solar cell 'textile' that could be woven into clothes. The textile retains a power-generation efficiency close to 1% even after been bent more than 200 times, and can be illuminated from both sides.  

Scientists have been looking into flexible solar cells for decades, partly for coating irregularly shaped objects but also for integrating into wearable fabrics. One popular line of investigation has been dye-sensitized solar cells, in which a pigment absorbs sunlight to generate electrons and their positive counterparts, holes, before passing on those charges to inexpensive semiconductors. These solar cells are cheap and flexible, but the liquid nature of their pigments means that they must be well sealed. Bend a dye-sensitized solar cell more than a few times and the seals are likely to break, destroying its light-harvesting properties.  

That is why Huisheng Peng at Fudan University in Shanghai and colleagues have been exploring another option: polymer solar cells. Although their maximum efficiencies fall below 10% - about half that of crystalline silicon, the most prevalent solar cell - polymer solar cells are lightweight, flexible and easy to manufacture. Peng and colleagues' solar cell textile consists of microscopic interwoven metal wires coated with an active polymer (to absorb the sunlight), titanium dioxide nanotubes (to conduct the electrons) and another active polymer (to conduct the holes). The researches coated each side of the textile with transparent, conductive sheets of carbon nanotubes, which complete the circuit.

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Tile Replacement Mount from Quick Mount PV

Tile Replacement Mount from Quick Mount PV

The Tile Replacement Mount provides a fast and easy way to install solar on tile roofs while protecting against water intrusion. Simply remove the tile and replace it with the Tile Replacement Mount. Works with all standard curved and flat tile roofs, and all standard rail-based racking systems. Flashed at both the deck and top levels, the mount is fully engineered to meet code requirements and industry best practices. The Tile Replacement Mount features Quick Mount PV's patented Elevated Water Seal technology for optimal waterproofing. Get a free sample and see for yourself!