France to pave 1000km of roads with solar panels

Derek Markham for TreeHugger:  Over the next five years, France will install some 621 miles (1,000km) of solar roadway using Colas' Wattway solar pavement.

Solar freakin' roadways! No, this is not the crowdfunded solar road project that blew up the internet a few years ago, but is a collaboration between Colas, a transport infrastructure company, and INES (France's National Institute for Solar Energy), and sanctioned by France's Agency of Environment and Energy Management, which promises to bring solar power to hundreds of miles of roads in the country over the next five years.

One major difference between this solar freakin' roadway and that other solar freakin' roadway is that the new Wattway system doesn't replace the road itself or require removal of road surfaces, but instead is designed to be glued onto the top of existing pavement. The Wattway system is also built in layers of materials "that ensure resistance and tire grip," and is just 7 mm thick, which is radically different from that other design that uses thick glass panels (and which is also claimed to include LED lights and 'smart' technology, which increases the complexity and cost of the moose-friendly solar tiles).  Cont'd...

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

TRA SNOW AND SUN - SOLAR TILE MOUNT

TRA SNOW AND SUN - SOLAR TILE MOUNT

You haven't installed a tile mount that is easier to install than the Solar Tile Mount manufactured by TRA Snow and Sun. Solar Tile Mount is used on all tile roof profiles: flat, mid, and high. It is made in the USA of aluminum alloy for strength and excellent corrosion resistance. Solar Tile Mount is built to allow more ease in installation with more rise from the tile surface to the rail for better air flow below panels. The adjustable base is longer than most allowing attachment 6" to the left or right to have the bracket in the base of the pan of the tile and still fasten to the rafter. Solar Tile Mount is adjustable for counter batten systems from ¾" to 3". The horizontal rail is directly above base fasteners giving greater uplift resistance than any other system. For superior waterproofing apply TRA Snow and Sun's butyl backed VersaFlash aluminum flashing. No tile flashing is needed on top of the tile for greater labor and material cost savings.