It's clear that all large-scale lighting applications, from businesses to schools, stand to benefit from LEDs. Whether it's T8 fluorescent replacement, halogen replacement, or large-scale incandescent floodlight replacement, the benefits make the upgrade a no-brainer
Spinwave Systems develops and markets wireless EMS. This includes wireless sensors for temperature, relative humidity and motion (occupancy), wireless utility meter interfaces for electric, gas and water meters and wireless switches to control equipment and lighting loads.
Independent studies carried out in the UK have predicted that conservatively about 7% of the UK's present electricity usage could be produced from tidal stream energy sources. Evopod has been developed to extract energy from the deeper water sites where the water depth is greater than 35m to 40m.
The three leading countries -- Germany, Japan and the USA -- represent almost 89% of the total worldwide PV installed capacity. Could these countries' renewable energy political decisions provide a model for the rest of the world?
The interesting thing is that despite the fact evacuated tubes have better performance throughout the day because of IAM, are more economical due to ease of installation, and are capable of reaching higher temperatures, the technology has not received the recognition it deserves since the majority of the publicity we currently see focuses on PV.
The average power consumption per server quadrupled from 2001 to 2006, while the average number of servers doubled and is expected to grow another 50% by 2010. This rapid growth has resulted in data centers typically consuming up to 100 times more energy per square foot than a typical office building.
Thin-film solar cells are cheaper than traditional solar panels, such as those made of polycrystalline silicon, but the yield is lower. However, the combination of these properties is promising according to the Thin-Film Future conference organized recently by SolarPlaza in Munich. An impression of the heavily attended gathering.
In today's marketplace, energy has become a strategic issue. Organizations of all types, including corporations, government agencies and non-profits, are evaluating where they get their power, how much they use and what they're spending for it.
Generally, the greater the economic prosperity and the higher percentage of urban population, the greater the amount of solid waste produced. Reduction in the volume and mass of solid waste is a crucial issue especially in the light of limited availability of final disposal sites in many parts of the world.
This article is intended as a suggestion for manufactures of, and users of large wind turbines. Users have noted reliability problems mostly due to the use of a mechanical gear transmission required to transform the relatively slow rotational speed of the large turbine hub to the required shaft speed of the synchronous alternator.
A new eco-friendly £5 million private care home in Sussex has elected to use solar energy as the primary source for both its heating and lighting. Eric Hawkins, MD and founder of Powertech Solar, describes how the project has provided an ideal opportunity to demonstrate the energy saving potential of the company's Suntech Solar Commercial range.
I think it's feasible to be off the grid anywhere you have access to sun, wind, or water for power. However, the city planning department may have other ideas. I know a couple in southwest Oregon whose urban homestead was off-grid on a city lot for many years, but they had a community that was supportive of renewables.
Homeowners get a solar system that looks great and performs well—and one that installs quicker and easier than anything else on the market. Since the installation crew spends less time up on the roof and makes about 25 percent less rooftop penetrations, there is less wear and tear on a roof.
How far the current PV cost is still separated from grid parity depends largely on the geographical situation, on the price of grid electricity, and on whether it concerns a cheaper or a more expensive PV system.
There are fuel cells installed in stationary applications all over the world, in a wide variety of locations, including hotels, hospitals, schools, telecommunications towers, breweries and in some parts of the world, notably Japan, in houses and apartment complexes.
Records 1456 to 1470 of 1949
3Mâ„¢ Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications. The backing on this tape is an ionomer film that is very tough yet flexible and abrasion resistant. The very soft and thick acrylic adhesive has excellent sealing properties and good outdoor durability. This single coated tape is designed to seal over an existing joint, seam, or penetration. The adhesive is designed to adhere well to the ionomer film so that overlapping tape joints can be made while maintaining a strong seal. 3Mâ„¢ Extreme Sealing Tape - instant sealing that rolls on fast and looks good.