Energy Roofing Systems recently announced plans to develop the first commercial solar PV system in North Georgia. The 20kW project was made possible through federal and state clean energy tax credits that cover 65% of the cost. The company also has plans to help many local businesses qualify.
Warranty doubles the existing 5 year warranty on ES-A and ES-E series panels.
the very first vertical axis wind turbine has been installed at a residence in Jamul, Calif.
The increased construction of desalination plants due to the steady fall in the cost of several key technologies for seawater-to-freshwater conversion is projected to generate a cumulative capital investment of $87.8bn worldwide from 2010 to 2016, says a report from Pike Research.
Deepwater Wind, a company based in Providence, Rhode Island, has drawn up plans for what could be the largest wind farm in U.S. waters, the company announced last week. The proposed farm would generate a huge 1,000 megawatts of power and would be located 18 to 27 miles off the coast of Rhode Island and Massachusetts at a depth of 52 meters—considerably deeper than any other large scale wind project to date. By moving into deeper waters, turbines can harness stronger, more sustained winds. And the massive turbines the company plans to use—each capable of generating more than 5 megawatts of power, with blades rising 150 meters above the water's surface—will be nearly invisible from shore, thereby avoiding potential legal battles with coastal communities that perceive the turbines as eyesores. Four-legged steel platforms rising from the seafloor will allow Deepwater Wind to operate in depths more than twice those of conventional steel "monopole" wind turbine platforms. As water depth increases, the diameter of monopoles must increase exponentially, making them uneconomical in water deeper than about 20 meters. By using a four-legged design, company officials say they will be able to work in depths that were previously prohibitively expensive.
- Ergon to Utilize Advanced D-VAR® STATCOM Technology to Increase Grid Reliability - AMSC Leads Worldwide Market for STATCOM Intelligent Grid Solutions
Thomas Taylor, General Manager of St. Louis-based Vertegy, recently authored a book entitled, Guide to LEED® 202009: Estimating and Preconstruction Strategies. Taylor was recruited by the AGC to write the book, which is now complete and available for pre-order.
This book is the newest to the Green Guru Guides to help you with green living. Solar Power For Your Home features a step-by-step instruction manual and useful photos and illustrations.
NRG Energy, a leader among independent power producers in renewable energy, signed an agreement to purchase Green Mountain Energy Company for $350 million, pending regulatory approval.
Corvus Energy selects Jastram Technologies as its exclusive Canadian partner to distribute Corvus Energy's lithium-ion batteries to Canada's Commercial, Recreational and Military Marine Sectors.
A plug-in hybrid electric vehicle (PHEV) is the logical next step for the millions of people who own hybrid cars or who want an extremely efficient car. PHEVs solve a lot of problems quickly. They combine the benefits of pure electric vehicles and hybrid electric vehicles. Much like pure electric vehicles, they plug into the electric grid and can be powered by the stored electricity alone. Similar to hybrid electric vehicles, they have engines that enable them to have a greater driving range and that can recharge the battery.
"Cracker Barrel will be rolling out fast chargers called the Blink, made by ECOtality, Inc, at select restaurant locations across Tennessee for Phase 1 of the project.
Greenleaf Power, a biomass power plants owner and operator, has signed a deal to buy 100% of the stock of Colmac Energy, including the 47MW biomass power plant operated by Colmac's majority shareholder American Consumer Industries since its construction and initial start-up in 1992.
NAFTC Studios' plan to open a state-of-the-art film studio in Lakeshore, Ontario is revitalized thanks to the inclusion of a 500 kW solar power plant. The proposed studio failed to meet provincial and municipal standards back in 2005 and the project was put on hold - until now.
In this article I'll show you how to untether from the grid, and avoid a smelly, noisy, fuel consuming generator except in extreme weather conditions. It can be pricey for a good system, but you'll have minimal ongoing expenses, unlike fuel and maintenance on a generator. The less power you consume, the less power you will need to generate, keeping the system costs down. It's important to start with conservation.
Records 17596 to 17610 of 23521
Solar & Wind - Featured Product
The Power Railâ„˘ Commercial Mounting System is designed with the professional PV solar installer in mind. Both the XD/UD and LD/MD rails feature single tool assembly with the revolutionary patented RADâ„˘ Lock-in-Place bolt for fast and secure module clamping. The high strength marine-grade aluminum rails include an integral wiring channel for securing cables and providing a professional finish.