The developments in battery storage systems being launched to the UK market this year will help to distribute energy more efficiently, and with the PV market in a state of flux following the reductions in the tariff rates, the battery storage developments should provide some stability to the trade.
In general, the installer just removes the roof piece, locates the rafters, drills pilot holes, fastens the product to the rafter, properly seals the penetration, and grinds the tile where the mount is located before placing the roof piece back over or around the mount.
Managing fluids at high temperatures presents a safety hazard as the fluid may come into contact with the engineer whilst the fluid is being sampled
Melwood partnered with Standard Solar to build a 413.8 kW rooftop system on its Horticulture Training Center, along with a 517.1 kW carport system (930 kW total), which will provide 95 percent of the center's energy needs.
The most popular fluid used in CSP plants is the eutectic mixture of BDO. This fluid has a high operating temperature (up to 400 degrees Celsius), a low viscosity and good thermal stability.
Monumental Market Conditions Revealed as First Mexican Clean Energy Capacity Auction Prequalification Bid Window Closes
The first auction price bids are due in March, and prequalification for the second renewable auction in Mexico is expected to take place in as early as May or June.
Heat transfer fluids (HTFs) are used in a variety of processes to connect a source of heat with a system requiring thermal energy and are commonly used in CSP plants.
For those seeking employment in the Energy & Sustainability Industry, I would recommend the LEED certification as well as the Certified Energy Manager certification (CEM). Both of these on a resume make a candidate within the industry considerably more attractive.
A significant issue for wind may well be maintaining its price competitiveness vis-a-vis solar as the PTC amount goes down over the next five years while the ITC used by solar will remain at 30% through 2020
Distribution companies are reluctant to expand grid into rural areas and revenues for tariffs cannot provide sufficient returns to recover the investment. Providing energy access to such villages through stand-alone off-grid solar systems or mini or micro-grids can provide them access to modern energy sources.
SAENORE will create and maintain knowledge transfers amongst renewable energy experts in South Asia and it will work in the areas of Energy efficiency, Solar Energy, Wind Energy, Small Hydro Power, Bio-energy and Geothermal Energy.
The introduction of more DERs on utility systems and at customer sites provides support for increased reliability and resiliency, if appropriately located and properly configured.
Companies selling PV systems are concerned that if utilities add a set fee for solar customers to remain connected to the grid to take in electricity at times when the sun isn't shining, or if utilities decrease the retail credit for the times when customers send their excess generation back to the grid, people will be less likely to put panels on their roofs.
The map shows 40 jobs from entry, mid and advanced levels across four industry sectors: manufacturing, system design, project development and installation/operations, and it identifies more than 60 routes to advancement among them.
We're no longer a niche industry and there are many companies competing for customers. Growth like this is what happens when new technology intersects with drivers of change like the need to shift to clean energy, to modernize our infrastructure and give choice to consumers.
Records 61 to 75 of 1568
Solar & Wind - Featured Product
The Sunny Boy 5.0-US / 6.0-US features a wealth of improvements and joins SMA's lineup of field-proven solar technology backed by the world's #1 service team. The world's first Secure Power Supply now delivers up to 2,000 W of opportunity power when the grid goes down and the sun is shining. Installation has never been easier thanks to SMA's Installation Assistant, direct access via smartphone, and integrated DC disconnect. The Sunny Boy's multiple independent input channels, each with SMA's OptiTrac™ Global Peak, mean hundreds of stringing configurations for flexible system design while solving the challenges of complex roofs and shading. The residential PV market is changing rapidly, and we understand that your bottom line matters more than ever. That's why we've designed a superior residential solution that will help you decrease costs throughout all stages of your business model. The Sunny Boy 5.0-US and 6.0-US are once again raising the bar by offering improved performance, enhanced features, and most importantly, cost savings across the entire spectrum of residential installation processes.