State leaders in the Northeast should keep watch of neighboring states to share best practices and innovative solutions for microgrids. Stakeholders can also look nationwide to other states including California and Illinois, where officials are creating incentives and addressing regulatory challenges.
While buying a solar panel one must keep in mind various factors like where it will be installed, purpose; commercial or residential use, and budget.
A road made of solar panel material is producing more energy than the creators expected. Engineers created a solar power bike path near Amsterdam that is over 200 feet long last year, and the road generated over 3,000kwh during the first six months, according to Al Jazeera, enough energy to power a house for a year. The company that created the road, SolaRoad, claims that means the road can produce 70kwh per square meter per year. The road is made of solar panels, glass, rubber and concrete. The road can either power street lamps or add power to the general grid. Over 150,000 cyclists have ridden on bike path without a problem since the project began. The path is made to be non-reflective and to prevent skidding. SolaRoad is still refining its materials to make them even more weather proof and efficient, and the company hopes to expand to larger areas in the future.
The installation involved locating where the fastener is going, driving the fastener into the metal deck underneath the insulation and membrane, sliding the PowerGrip over the fastener head, and hot air welding it in place.
Hawaii lawmakers voted 74-2 this week to pass the nation's first 100% renewable energy requirement. The measure, House Bill 623, makes Hawaii a global leader in renewable energy policy by requiring that 100% of the islands' electricity must be generated from renewable energy resources--such as wind, solar, and geothermal-no later than 2045. "Hawaii lawmakers made history passing this legislation--not only for the islands, but for the planet," said Jeff Mikulina, Executive Director of the Blue Planet Foundation. The measure, if enacted by Governor David Ige, would make Hawaii the first state in the nation with such a 100% renewable energy standard. Blue Planet Foundation, whose mission is to clear the path for 100% renewable energy, praised the move. "Passage of this measure is a historic step towards a fossil fuel free Hawaii," said Mikulina. "This visionary policy is a promise to future generations that their lives will be powered not by climate-changing fossil fuel, but by clean, local, and sustainable sources of energy."
Bill Tucker for Forbes: Vortex Bladeless is a radical company. It wants to completely change the way we get energy from the wind. Think wind stick instead of a massive tower with blades that capture blowing winds. Wind stick. Really. Lest you think I’m mad, I’ve included a picture of this bladeless generator that helps with the visualization and explains the company name. See? There are no blades. What that “stick” (the company prefers, mast) does is capitalize on an effect of the wind which has been a very serious problem for architects and engineers for decades. When wind hits a structure and flows over its surfaces the flow changes and generates a cyclical pattern of vortices at the tail end of the flow. This is known as the vortex shedding effect which creates something known as vorticity and that is what Vortex Bladeless uses to generate energy. For those who need a explanation that exceeds my ability to fully explain, check out this link on Wikipedia and then come back and join the rest of us who won’t wait for you. (you’re clearly ahead of us anyway)
How an ultra-clean, highly efficient fuel cell power plant helps a state university boost energy security, achieve ambitious sustainability goals and save more than $100,000 in energy costs annually.
It is important to pay attention to product specifications regarding the rate at which energy is coming in, the amount of energy stored, and the rate at which that energy is being consumed.
Adopting a building-integrated solar air heating system for a multi-residential, high rise exterior retrofit of the Lyndon B. Johnson public housing complex in Cambridge, Massachusetts.
From Melissa Abraham | MIT Energy Initiative : Report highlights enormous potential and discusses pathways toward affordable solar energy. Solar energy holds the best potential for meeting humanity’s future long-term energy needs while cutting greenhouse gas emissions — but to realize this potential will require increased emphasis on developing lower-cost technologies and more effective deployment policy, says a comprehensive new study, titled “ The Future of Solar Energy ,” released today by the MIT Energy Initiative (MITEI). “Our objective has been to assess solar energy’s current and potential competitive position and to identify changes in U.S. government policies that could more efficiently and effectively support its massive deployment over the long term, which we view as necessary,” says MITEI Director Robert Armstrong, the Chevron Professor in Chemical Engineering at MIT.
The system incorporates panels and micro-inverters and steel and bearings and a microcontroller with an LCD display, to control the daily motion of the array. And, I might add, a light sensor to sense night time and daytime, and an AC current sensor to measure the amps produced (by the array) and amps consumed by the controller.
Distributed generation technologies, like fuel cells, have demonstrated a track record of providing practical solutions to issues facing the grid, and no other technology can offer both the resiliency and efficiency of fuel cells, while still achieving significant emission reductions.
Ryan Wallace for The Science Times: Known as the "Powerwall", Tesla's newest invention is a thin, wall-mounted battery that is the size of a flat screen TV. And with this new battery home owners who have already invested in solar power will be able to entirely go off the grid, and even to sell their excess solar juice back to energy companies. Developed in conjunction with the lithium-ion batteries that Tesla uses for its electric vehicles, the Powerwall unit is an inexpensive unit, only running $3,000 to $3,500, and with it Musk and his companies believe that humans may one day be able to transition to solely using energy derived from the Sun. Though the installation may look like an artpiece, it packs quite a punch at 10 kWh, and with it consumers will not only be able to store their energy for dark solar-free nights, but also more efficiently contribute to global energy use by contributing carbon-free energy back into the mix.
Renewable Energy Corporation, a Baltimore solar panel installer, created the graphic below to show how Maryland and Virginia measure up against each other.
Late Thursday night in Los Angeles, Tesla announced "Tesla Energy," described by the company in a statement as "a suite of batteries for homes, businesses, and utilities fostering a clean energy ecosystem and helping wean the world off fossil fuels." The statement continued: "Tesla is not just an automotive company, it’s an energy innovation company. Tesla Energy is a critical step in this mission to enable zero emission power generation." Tesla CEO Elon Musk made the official announcement onstage at the company's design studio in Hawthorne, CA, just south of LA. The home battery, call the "Powerwall," is intended to store solar energy and enable customers to bank grid electricity from non-peak periods and use it during peak times, saving money. It looks "like a beautiful piece of sculpture," Musk said. You can order it now, and it comes in different colors. "The Tesla Powerwall is a rechargeable lithium-ion battery designed to store energy at a residential level for load shifting, backup power and self-consumption of solar power generation," Tesla said. "The Powerwall consists of Tesla’s lithium-ion battery pack, liquid thermal control system and software that receives dispatch commands from a solar inverter. The unit mounts seamlessly on a wall and is integrated with the local grid to harness excess power and give customers the flexibility to draw energy from their own reserve."
Records 886 to 900 of 3321
Professional weather sensors form the heart of large solar plants supporting their operation and performance. Lufft was the first manufacturer to combine several sensors in one housing, bringing the largest multiparameter weather sensor family with 19 members into being. Many of them are well-suited for solar site assessment and continuous monitoring. The most commonly used one is the WS600 delivering data on temperature, air pressure, wind, relative humidity and precipitation. Through its open protocol, it can easily be attached to radiation sensors e.g. from Kipp&Zonen. Other models have an integrated Silicon, Second Class or Secondary Standard radiation sensor.