Recent technological developments in the electro-reduction of carbon dioxide to formic acid, a valuable chemical with possible application in the steel pickling process, may offer an alternative to expensive large scale carbon capture and storage operations.


Larry Kristof

EarthToys Renewable Energy Article
Recent technological developments in the electro-reduction of carbon dioxide to formic acid, a valuable chemical with possible application in the steel pickling process, may offer an alternative to expensive large scale carbon capture and storage operations.
Capitalizing on Carbon Dioxide
Emerging technologies hold promise for the steel industry

By Larry Kristof, Mantra Venture Group

With the inauguration of President Barack Obama, the United States will soon follow in the footsteps of the European Union by introducing measures to reduce greenhouse gas emissions 80 percent by 2050. Obama’s plan includes the introduction of a federal cap and trade system in which the government would set limits on carbon emissions by power plants, factories and other installations. Those who emit more carbon dioxide than the prescribed limit will be allowed to buy or trade permits with those that emit less. Further, Obama vows to allot US$15 billion each year to stimulate private sector efforts toward a clean energy future.

Essential to industrial development, the steel industry will play a vital role in the expansion of alternative technologies including wind, solar and the production of fuel efficient vehicles. For an industry that currently emits 4% of the world’s total greenhouse gas emissions, implementation of a carbon cap and trade system would come as a big blow. Although improvements in efficiency have dramatically decreased the industry’s greenhouse gas emissions they remain a staggering 1.7 tons of carbon dioxide released per ton of steel produced. Global steel output is about 1.3 billion tons per year. Scientific advancements in carbon removal and conversion techniques are therefore paramount.A great deal of emphasis has been placed on carbon capture and storage (CCS) as a way to deal with high carbon dioxide emissions. Carbon capture and storage is a broad term used to describe technologies that will capture carbon dioxide from point sources and store it in deep geological formations, in deep ocean masses, or as mineral carbonates. The processes involved in CCS have been demonstrated in other industrial applications, so it will likely be one part of the global solution. So far however, the associated costs and environmental risks have prohibited substantial commercial applications.

In light of the economic, technical and legal challenges facing the large-scale deployment of CCS, scientists are exploring innovative strategies to convert carbon dioxide into valuable fuels and chemicals. By turning a waste product into a commodity, researchers are hoping to provide a financial incentive for companies to begin the transformation to clean technologies. Originating at the University of British Columbia, a new technology named ERC (the electro-reduction of carbon dioxide) aims to take CO2 directly from blast furnaces and convert it to formic acid, a valuable chemical with many industrial applications. Although the ERC process is not limited to use in the steel industry, a patented technology exists that claims the advantages of formic acid over the commonly used mineral acids for steel pickling. Such technology could provide a cyclical industrial benefit and an economic incentive for industry to take the next step toward CO2 mitigation.

Hydrochloric acid is currently used extensively in the steel pickling process to clean the oxidized surface of hot-rolled steel during the manufacturing process. It is an aggressive, non-biodegradable acid that corrodes the surrounding plant equipment, can pit the finished steel product, and must be put through an expensive regeneration or neutralization process before it can be reused or released into the environment.

Formic acid has many potential advantages over hydrochloric acid in steel pickling, including but not limited to; producing a better product quality, the ability to be re-used from the spent solution to provide an easy, cost effective recycling process and the fact that it is non-toxic and bio-degradable. The ERC process also produces oxygen as a byproduct which can be used in the blast furnace to increase iron production. 

The amount of formic acid that can be produced at any one steel plant would exceed the local pickling requirements, but the acid is widely used today in a variety of industrial processes and could replace many industrial chemicals in new applications where it becomes cost effective. New technologies also show that formic acid has the potential to play a leading role in fuel cell development, both as a direct fuel and as a fuel storage material for on-demand release of hydrogen.

As the political climate surrounding greenhouse gas emissions grows hotter it will be important for competitive companies to move towards technologies that not only reduce their environmental impact but provide an economic advantage. Innovators are working hard to find practical solutions by capitalizing on carbon dioxide as a valuable commodity instead of treating it as a waste that requires costly disposal. Now it is up to industry to take the bold steps needed to control the emission of carbon dioxide.

More information on the ERC technology can be found at Mantra Venture Group facilitates investment in sustainable, commercially viable technologies.


Quick List of references for: 

Li Hui and Oloman.C., The electroreduction of carbon dioxide in a continuous reactor. J.Appl.Electrochem. In press. April 2005 

Obama Energy Plan: 

European Steel Research Association information 

EPA Profile of the Iron and Steel Industry 

Hydrochloric acid information: 

Björn Loges, Albert Boddien, Henrik Junge, Matthias Beller. Controlled Generation of Hydrogen from Formic Acid Amine Adducts at Room Temperature and Application in H2/O2 Fuel Cells. Angewandte Chemie International Edition 2008, 47, 3962–3965 doi: 10.1002/anie.200705972 

The content & opinions in this article are the author’s and do not necessarily represent the views of AltEnergyMag

Comments (0)

This post does not have any comments. Be the first to leave a comment below.

Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

SolarEdge Technologies - EV Charging Single Phase Inverter

SolarEdge Technologies - EV Charging Single Phase Inverter

The SolarEdge PV inverter combines sophisticated digital control technology with efficient power SolarEdge's EV charging single phase inverter offers homeowners the ability to charge electric vehicles up to six times faster than a standard Level 1 charger through an innovative solar boost mode that utilizes grid and PV charging simultaneously. This product is the world's first EV charger with an integrated PV inverter. Reducing the hassle of installing separately a standalone EV charger and a PV inverter, the EV charging inverter eliminates the need for additional wiring, conduit and a breaker installation. By installing an EV charger that is integrated with an inverter, no additional dedicated circuit breaker is needed, saving space and ruling out a potential upgrade to the main distribution panel. Whether you own an EV now or just want to be EV-ready, future-proof your home with SolarEdge.