Facilities managers at large facilities often have the challenging task of managing all the flow energy in their facility with the mandate from upper management to save money on energy costs.

Now Measure All Flow Energy In Your Facility — One Solution — Three Metering Technologies

Matthew Olin | Sierra

Facilities managers at large facilities often have the challenging task of managing all the flow energy in their facility with the mandate from upper management to save money on energy costs. To accomplish this goal, it’s critical to get accurate flow measurement data of the flow energy in your facility such as: natural gas, compressed air, steam, chilled and hot water.

The next challenge is to find the right flow meters for these gas, liquid, and steam applications. Often many different technologies are needed depending on the type of fluid being measured and many different flow meter companies must be used. Dealing with different companies and technologies can be very time consuming, expensive, and ultimately frustrating.

Sierra is tackling this issue with our new Big-3™ flow energy management strategy. Sierra now offers facilities managers a “one-stop shop” for all flow meters needed for effective flow energy management—all made in the USA and supported globally by our network of over 150 locations in over 50 countries.

We design and manufacture thermal mass flow meters for accurate compressed air and natural gas measurement, vortex shedding flow meters for steam and water measurement, and transit-time ultrasonic flow meters for liquid flow measurement. Product commissioning and training, lifetime tech support, and a global network of flow experts from one company make it easy to install and operate all gas, liquid and steam flow meters.

In addition, for easy integration into your facility, Sierra’s “Big-3” thermal, vortex, and ultrasonic (TVU) flow meters have:

  • Sierra’s commitment to great sensors with lifetime warranty—over 40 years of flow meter innovation and expertise
  • Shared firmware platform—Raptor OS operating system
  • Shared software apps for ease of use, so no learning new software and local display interface menu structures for each device
  • Major focus on excellent, fully automated, calibration facilities
  • Broad application capability (gas, liquid, steam)
  • One company, one point of contact for all three flow metering technologies
  • All designed, built and calibrated by Sierra in Monterey, CA USA

 

Watch Video

Let me explain more about Sierra’s new Big-3™ strategy and how it can help you transform your flow energy measurement strategy by watching this short video.

 

The content & opinions in this article are the author’s and do not necessarily represent the views of AltEnergyMag

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries

Sun Xtender® Deep Cycle AGM Batteries for renewable energy storage are manufactured in the USA by Concorde Battery Corporation and are built to the same demanding standards crucial to supporting the aircraft industry. To facilitate maximum conductivity & charge acceptance Sun Xtender® batteries are constructed with copper alloy corrosion free terminals & robust intercell connections. Endurance and optimal float life are achieved through plates thicker than the industry standard. Sun Xtender® Batteries' AGM maintenance free design is an ideal solution for off grid and grid tied systems.