Projects currently exist that combine solar photovoltaic technology with reverse osmosis. As battery technologies for solar systems become more prominent, the practicality of these setups will increase.

Clean-Energy Water Desalination the Key to Disaster Preparedness
Clean-Energy Water Desalination the Key to Disaster Preparedness

Emily Folk | Conservation Folks

In a disaster situation, access to water needs to be a priority. Less than a week without water can be deadly. Events like hurricanes, tornadoes and wildfires can knock out power and access to the regular water system. Droughts are becoming more common as well, making water shortages a growing concern.

Water desalination is a practical way to provide water to people during natural catastrophes and other situations in which access to fresh water is limited. These desalination plants require power, though, and storms may take fossil fuel-fired electricity generation out of commission.

Using renewable energy technologies, such as concentrated solar, may provide a solution to this challenge. They may stay online when other power sources become disrupted. The falling costs of renewable energy technologies also make clean-energy water desalination an economically feasible approach even if areas where desalination must be used more regularly.



Desalination processes remove the salt from saltwater to make the water potable. In parts of the world where access to fresh water is limited, desalination is a primary source of drinking water. Cost has been a primary barrier to using desalination, but as technologies improve, the expenses are going down.

There are two major categories of desalination technologies:

  • Membrane technologies, which include reverse osmosis, electrodialysis and electrodialysis reversal

  • Thermal technologies, which include multi-stage flash distillation, multi-effect distillation and vapor compression distillation


There are around 18,500 desalination plants with a capacity of 22.9 billion gallons. The amount of membrane to thermal plants is approximately even. Tests have shown that reverse osmosis is the most efficient technology available today.


Clean Energy and Desalination

Removing salt from seawater is energy-intensive, which can mean high costs and high environmental impact if using fossil fuels. Using renewables to desalinate water dramatically reduces its environmental impact and may reduce its costs under some circumstances.

As both desalination and clean energy tech improve, innovators are looking to combinations of technologies.

Projects currently exist that combine solar photovoltaic technology with reverse osmosis. As battery technologies for solar systems become more prominent, the practicality of these setups will increase. Some have also proposed that desalination plants run by renewables could alternate between providing electricity and water, depending on what is most in demand.


Cost Effectiveness

One of the most notable concerns surrounding using clean energy to desalinate water is cost. As the costs of renewable energy come down, though, this solution has become feasible. A recent case study found it to be comparable in price to a fossil fuel-powered desalination plant.

The study, from the National Research Center in Egypt, determined that the cost of a conceptual reverse osmosis facility using photovoltaics to desalinate seawater would be $1.21 per cubic meter. Costs for a fossil fuel-powered plant range between $1.18 and 1.56 depending on fuel prices, the researchers said.

While such a plant would still require a substantial upfront investment, the costs are rapidly decreasing and are often on par with those of other solutions.


Clean-Energy Water Desalination for Natural Disasters

Desalination plants that run on clean energy could be key resources during natural disaster recovery. It's vital that people have access to clean drinking water following a catastrophic event.

These events, especially if they involve flooding, can contaminate water systems, including wells. Water desalination plants can make even heavily contaminated water safe for drinking, and having enough capacity for entire communities is feasible with even a single desalination unit.

Using renewable energy, such as solar and wind, means that you don’t need to rely on transporting fuels into a disaster area. For remote locations, distributed solar can provide the power to desalinate water even if disconnected from the main grid.

Clean-energy water desalination plants can serve as both long-term and emergency solutions. They are now more technologically and economically feasible than ever before, and continued advancements in these areas may make them even more attractive drinking water solutions in the coming years.

The content & opinions in this article are the author’s and do not necessarily represent the views of AltEnergyMag
Emily Folk - Contributing Author

Emily Folk - Contributing Author

Emily is an environmental writer, covering topics in renewable energy and sustainability. She is also the editor of Conservation Folks.

Other Articles

Meeting Air Quality Standards During the Manufacturing Process
Meeting air quality standards requires a broad look at a company's operations as well as continual monitoring of emissions, pollution control plans and changes in air quality standards themselves.
Importance of Energy Efficient Lighting for On-Site Work
Technologies that enable more energy efficient lighting are now widely available. Management and maintenance of lighting equipment can also help make it more efficient.
How Heating your Home with Renewable Energy Works
Even if you don't totally convert to renewable energy, using it to offset the cost of your heating and cooling can save you a lot of money in the long run.
More about Emily Folk - Contributing Author

Comments (0)

This post does not have any comments. Be the first to leave a comment below.

Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Baja Carports Design-Build Solar Support Systems™

With Baja Carports 35 plus years in the industry installing our Solar Support Systems nationwide and whose founder Bob Hayworth was one of the first to use solar panels as the rooftops on commercial carports ~ is assurance that you will receive Baja expertise in all phases of installation. Our team's diligence makes the design-build process easy for customers. You don't need a set of architecture plans to begin talking to us about your project. Baja's in-house design engineers will work closely with you to meet your project specifications and city's criteria. You'll have our design team's years of experience applied to your plans. Our engineers will deliver a set of stamped plans, which maximize canopy coverage and details the most-effective layout for your business' parking lot.