Hanergy MiaSolé and Solliance Solar Research Set a New World Record Efficiency of 23% For Flexible Perovskite/CIGS-tandem Solar Cells

The solar cell combines two thin-film solar cell technologies into a tandem solar cell stack: a top flexible semi-transparent perovskite solar cell with a bottom flexible copper indium gallium selenide (CIGS) cell.

Beijing, 12 September 2019 - The world's largest thin-film power solution company, Hanergy Thin Film Power Group (00566.hk), today announced that just 9 months after the presentation of the first record breaking flexible solar cell, its US based subsidiary, MiaSolé Hi-Tech Corp and European Solliance Solar Research established a new world record power conversion efficiency of 23% on a flexible solar cell. The solar cell combines two thin-film solar cell technologies into a tandem solar cell stack: a top flexible semi-transparent perovskite solar cell with a bottom flexible copper indium gallium selenide (CIGS) cell.


Combing best of both worlds
A tandem solar cell, which combines a semi-transparent perovskite cell and a CIGS cell, has the potential for high conversion efficiency exceeding single junction solar cell performance thanks to tunable and complementary bandgaps of these individual thin film solar cells.

In order to realize maximum conversion efficiencies, the absorption properties of the top perovskite cell and of the bottom CIGS cell should be tuned to complement each other. The perovskite solar cell was deposited on a transparent and flexible substrate, employed transparent conductive electrodes, and was optimized for maximum visible light conversion efficiency and infrared light transparency to allow the majority of infrared light to reach the bottom CIGS cell.

Cost efficient and high potential
CIGS technology has a proven track record as a high efficiency and stable solar technology and has entered high volume manufacturing in multi-GW scale around the world. CIGS technology has been successfully used to produce high efficiency flexible and lightweight cells and modules, which address markets where heavy and rigid panels cannot be used.

Perovskite solar cells, despite being a relatively young technology, have already achieved high efficiencies, and promise low cost solar technology based on abundant materials. Combining both technologies in a flexible and lightweight package expands the horizon of high performance, flexible, and customizable solar technology.

Strong collaboration
The CIGS bottom cell was developed by MiaSolé Hi-Tech, a wholly owned subsidiary of Hanergy and a provider of CIGS production turn-key factories and manufacturer of CIGS flexible solar panels, located in Silicon Valley, California. The CIGS cell used in this tandem architecture is based on a commercially available high efficiency flexible solar cell technology fabricated on lightweight stainless-steel foil using a proprietary high throughput roll-to-cell sputtering process. Recently, MiaSolé reported a flexible large area certified module efficiency of 17.44% with an active area of 1.08 m2.

As a result of the combined expertise of MiaSolé Hi-Tech in CIGS development and manufacturing and the Solliance team in the area of perovskite technology, a new record efficiency flexible perovskite/CIGS tandem cell was produced. "A highly efficient flexible hybrid solar cell is an outlook on how perovskite solar cell technology can innovate the established solar technology, leading to a different application area with improved performance" according to Sjoerd Veenstra, Program Manager for Perovskite-based Solar Cells at Solliance.

"This significant tandem cell performance gain was achieved through process improvements in the bottom CIGS cell", adds Director of Technology at MiaSolé Hi-Tech Dmitry Poplavskyy, "These process changes, implemented by MiaSolé, enable high efficiency CIGS cells with the spectral response better matched to the top perovskite cell. Further improvements in spectral matching as well as overall higher CIGS cell efficiency are expected to push the tandem architecture well beyond 23%".

About Hanergy Thin Film Power Group Ltd (http://en.hanergy.com/)
Hanergy Thin Film Power Group Ltd is a world's leading clean energy company, and a subsidiary of Hanergy Mobile Energy Group Company Ltd. Hanergy Thin Film Power Group Ltd is committed to "Building Mobile Energy". Since 2009, Hanergy has been working relentlessly to integrate worldwide solar technologies, and making a robust investment in research and innovation in the field of thin-film solar power. Thin film solar technologies have been applied to a series of commercial and non-commercial products, including HanTile, HanWall, Humbrella, HanPack and HanPower.

About MiaSolé Hi-Tech ( http://www.miasole.com/)
MiaSolé, a wholly owned subsidiary of Hanergy, is a producer of lightweight, flexible, shatterproof and powerful solar cells and cell manufacturing equipment. The innovative solar cell is based on the highest efficiency thinfilm technology available today, and its flexible cell architecture makes it ideal for a wide variety of solutions ranging from commercial roofing solar modules to flexible mobile energy devices. MiaSolé's turnkey CIGS equipment lines, CIGS process equipment technology, proprietary CIG target manufacturing, R&D product development support, and spare parts allow customers to produce their own high-efficiency cells and solar products. Founded in 2004, MiaSolé has evolved into the world leader in thin-film solar module efficiency.

Featured Product

Canadian Solar - HiKuBlack - Black Backsheet & Frame (Mono)

Canadian Solar - HiKuBlack - Black Backsheet & Frame (Mono)

Aesthetic appearance for residential systems: With black backsheet & black frame, Power range 380 ~ 405 W, Low power loss in cell connection. Enhanced reliability: · Low temperature coefficient (Pmax): -0.34 % / °C, LID LeTID less than 2.0%, Lower hot spot temperature, Better shading tolerance.