6K launches 6K ENERGY division to bring high performance energy storage materials to electric vehicle, grid storage and consumer markets

• World’s only production scale microwave plasma synthesis technology brings lower cost and truly sustainable production to advanced battery materials

North Andover, MA., March 31, 2020 - 6K, the world's leading developer of microwave plasma technology for the production of advanced materials, today announced it has formally entered the energy storage market with a new division dedicated to energy storage materials called 6K ENERGY. The move follows three years of intense internal development supported by commercial customers and the US Department of Energy (DOE). The company's UniMelt® plasma production system has been used to uniquely demonstrate high performance NMC cathode materials in a volume process that can deliver dramatically lower costs in a highly sustainable production paradigm.


"Customers in the electric vehicle and consumer electronics markets are eager for new technologies to advance battery performance, reduce costs, and look to new chemistries to pave the way forward to greater electrification," said Dr. Aaron Bent, CEO of 6K. "We have built an extremely talented team of energy material experts that have now demonstrated a unique ability to synthesize NMC, LTO, LLZO, silicon anode, and other advanced materials in a chemistry-agnostic approach. Now that we can match the performance of a best-in-class commercial NMC-622 in a volume production plasma, it became clear that we have something very unique and should accelerate efforts."

6K recently completed testing of its NMC-622 produced on the UniMelt plasma production system at a nationally-recognized independent validation laboratory. The testing was consistent with 6K's internal testing results showing reversible capacity of nearly 180 mAh/g and first cycle efficiency of 92%. These results further confirm for 6K that the UniMelt process can deliver the performance gains customers are demanding and that the creation of a dedicated division for energy storage materials is highly strategic and correct for the organization.

6K's UniMelt microwave plasma system creates a highly uniform, precisely-controlled and tunable high throughput production zone that can process a variety of low cost liquid, slurry or powder input materials. In the case of high nickel cathodes like NMC, the platform replaces a traditional multi-day multi-step process with a continuous process offering a residence time of as little as two seconds, starting with a fully pre-lithiated precursor. UniMelt technology is chemistry agnostic and is not bound by the limitations of co-precipitation, solid state synthesis methods, sol gel, or other traditional techniques, essentially allowing any chemistry to be produced on a single platform. 6K has demonstrated NMC 111, 532, 622, 811, and higher nickel chemistries.

"The combination of chemistry and morphology flexibility enables customers to create designer materials tailored for the specific energy, power and life requirements of their applications, at a pace not previously possible," explained Dr. Richard Holman, VP of Battery Products at 6K. "Our UniMelt technology offers total control over the chemistry and morphology of advanced battery materials at lower cost, while also delivering a production solution in a much more sustainable way."

The UniMelt process completely eliminates waste water and hazardous by-products by removing coprecipitation and the associated washing steps, and reduces energy usage and CO2 emissions threefold by eliminating the long thermal processing required in conventional NMC production. The efficiency and elimination of costly steps required with other approaches will allow 6K customers to achieve a significant reduction in cost for NMC production.

6K continues its development of high nickel cathodes using the UniMelt process under its DOE Phase 2 SBIR program, and will soon be doing limited sampling to select customers. 6K is also expanding its activities in advanced energy storage materials with several cathode development projects with external partners, and is developing a novel architecture of advanced high energy silicon anodes to enable high cycle life at high Si contents and low production cost.

See 6K at this year's Battery Show in Novi, Michigan, September 15-17.

About 6K
6K represents 6000 degrees, setting 6K technology apart from all others. It is the temperature of operation of UniMelt (5778K to be exact), the world's only microwave production scale plasma, and is also the temperature of the surface of the sun.

6K uses proprietary advanced plasma processing and industrial systems to create materials that are enabling the next-generation of commercial and consumer products. The company's continuous UniMelt® process allows for complete and unprecedented control of the entire materials engineering process, to produce materials at exact specifications.

The 6K Additive division is a ISO9001 facility, reclaims and processes over 500 tons of Ti-64 per year, and is in the process of building a state-of-the-art 40,000 square foot production facility for additive manufacturing powders, which is scheduled to open in the first quarter of 2020.

To learn more about 6K and 6K Additive, please visit www.6Kinc.com

Featured Product

CommTech Global - Assurance Commissioning in the Energy Industry

CommTech Global - Assurance Commissioning in the Energy Industry

CommTech Global Solutions, LLC, provides professional and reliable commissioning services to customers in all realms of the energy industry. We blend our skills in engineering and technology with innovative business models, offering a complete range of services to assist you for a successful and in compliance operational startup. Consolidation of all our service domains gives our clients a comprehensive set of expertise and far-reaching experience on each project.