The Victron Energy Multi RS Solar 48/6000 is No positioning statement available.
[ Product Visualization: Multi RS Solar 48/6000 ]
Hardware Ref: 019d9cbc
Key Features
- Operating modes
- Hybrid mode – Stores excess solar energy in a battery, to be used during the night or periods of high demand. Supplies additional power from the battery when demand exceeds grid capacity. Backup mode – Switches to backup mode during a grid outage. Off-grid mode – Operates without grid connection. Generator mode – Controls the generator to minimize run -hours. Supplies additional power from the battery when demand exceeds the capacity of the generator. PV Inverter mode – Works as a PV inverter without a battery.
- PowerControl and PowerAssist
- Boosting the capacity of the grid or a generator. A maximum grid or generator current can be set. The Multi RS will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the Multi RS will compensate insufficient generator or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.
- Display, Bluetooth and VictronConnect app
- The display reads battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device , using the VictronConnect app.
- Extendable PV capacity, both AC -coupled and DC -coupled
- The integrated 6 kWp PV capacity can be extended by adding solar chargers to the system. Alternatively, the PV capacity can be extended by installing PV Inverters, of which the output power will be automatically controlled by the integrated frequency shift power control.
- Communication ports
- VE.Can connection to a GX device for system monitoring, energy meter (11), data logging, and remote firmware updates. VE.Direct connection to a GlobalLink 520 for remote data monitoring.
- I/O Connections
- Programmable relay, temperature sensor and voltage sensor
Technical Specifications
| Multi RS Solar 48/6000 Identifier | |
|---|---|
| Peak Power Output: | 9 kW for 3 seconds, 7 kW for 4 minutes |
| Max Efficiency: | 96.5% at 1 kW load, 94% at 5 kW load |
| Dc Input Voltage Range: | 38 – 62V |
| Ac Output: | 230 Vac ± 2% |
| Maximum Continuous Inverter Current: | 25 Aac |
| Continuous Output Power At 25°c: | Increases linearly from 4600 W at 46 VDC to 5200 W at 52 VDC |
| Continuous Output Power At 40°c: | 4500W |
| Continuous Output Power At 65°c: | 3000W |
| Short Circuit Output Current: | 45 A |
| Max Ac Output Overcurrent Protection: | 30 A |
| Zero Load Power: | 20W |
| Maximum Dc Voltage: | 450 V |
| Mppt Voltage Range: | 65 – 450 V |
| Maximum Operational Pv Input Current Limit: | 12 A |
| Max Pv Short Circuit Current: | 16 A |
| Maximum Dc Solar Charging Power: | 6000 W total - 3000 W per tracker |
| Ac Input Voltage Range: | 187-265 VAC |
| Ac Input Frequency: | 45-65 Hz |
| Programmable Charger Voltage Range: | 36 - 60 V |
| Charge Voltage Absorption: | default: 57.6 V (adjustable) |
| Charge Voltage Float: | default: 55.2 V (adjustable) |
| Maximum Charge Current From Ac: | 88 A @ 57.6V |
| Total Maximum Combined Charger Current Ac Pv: | 100 A |
| Transfer Switch: | 50 A |
| Maximum Ac Input And Pass Through Current: | 50 A |
| Weight: | 11kg |
| Voltage Nominal V: | [48] |
| Weight Kg: | 11 |
| Voltage Max Pv V: | 450 |
| Current Charge Max A: | 100 |
| Power Continuous W: | 4500 |
| Unique Selling Proposition: | The Multi RS Solar 48/6000 is a 48V 6kVA inverter/charger with two independent 3kWp PV 450V MPPT trackers for 6kWp total panel capacity. It supports direct grid connection without batteries—perfect for starting simple and adding storage later. Updated in mid-2023 to a dual tracker design, its high-frequency technology delivers exceptional efficiency in a quiet, lightweight package with low standby power. |